USER INSTRUCTIONS
IMPORTANT NOTICES
A qualified gas engineer must carry out the installation and servicing of this appliance in accordance with these instructions and in compliance with current Building Regulations.
Such person must be a registered CORGI engineer.
This appliance is designed to run on natural gas or LPG, however it is not possible to change between the two versions without a factory service.
Warning - Only use the appliance with the spec- ified gas (see the appliance data plate).
This appliance is intended for use on a gas installa- tion with a governed meter.
The instructions must be read before use of the appliance.
Please note the following;
•Sealed components must not be interfered with.
•Servicing instructions and part identification numbers are given towards the back of the manual.
•Only use genuine Aarrow parts for replacements.
All surfaces except the control knobs are considered to be working surfaces.
Please note, that the monitoring system (ODS) operates if evacuation of the combustion products is interupted. If this does occur, turn the appliance to the fully OFF position, and
Warning: The stove will become very hot. Always use a fire guard in the presence of children, the elderly, and the infirm. The fireguard must comply with BS8423:2002 (Fire guards suitable for use with solid fuel appliances).
Warning: No combustible materials including clothing, furniture and furnishings (including curtains) must not be placed within 1 metre of the stove.
Warning: THIS GAS APPLIANCE MUST BE SERVICED EVERY TWELVE MONTHS BY A QUALIFIED GAS ENGINEER.
STATUTORY REQUIREMENTS
This product must be installed in accordance with the rules in force.
The current Gas Safety (Installation and Use) Regulations (as amended).
The Building Regulations for England and Wales 2000 ref Approved Document J 2002 edition (issued by the DTLR).
The Building Standards (Scotland) (Consolidation) Regulations.
Detailed recommendations are outlined in the current issue of the following British Standards:- BS5440 parts 1 and 2, BS5871 part 1 and BS6891
.
Any Manufacturer Instructions must not be taken as overriding statutory requirements.
_________________________________________
Warning: Under no circumstances must the stove be operated if the glass is cracked or broken.
Warning: If it is known or suspected that an operational or ignition fault exists on the appliance, it must not be used until it has been investigated and corrected by a qualified gas engineer.
CERTIFICATION
This appliance is CE certificated for performance and safety. Therefore, it is important that no alteration is made to the appliance.
Any alteration not approved by Arada Ltd will invalidate the guarantee.
38 | Aarrow Sherborne GSL CF |