Baldor iMN1800 Magnetic attraction between the motor and the magnet, Must be carefully followed

Page 5

Safety Notice:This equipment contains high voltage! Electrical shock can cause serious or fatal injury. Only qualified personnel should attempt installation, operation and maintenance of electrical equipment.

Be sure that you are completely familiar with NEMA publication MG-2, safety standards for construction and guide for selection, installation and use of electric motors and generators, the National Electrical Code and local codes and practices. Unsafe installation or use can cause conditions that lead to serious or fatal injury. Only qualified personnel should attempt the installation, operation and maintenance of this equipment.

WARNING:

The magnetic attraction between the motor and the magnet

 

assembly is extremely high. Keep fingers and other body parts

 

away from these objects to avoid injury by this magnetic attraction.

WARNING:

Use proper care and procedures that are safe during handling,

 

lifting, installing, operating and maintaining operations.

 

Improper methods may cause muscle strain or other harm.

WARNING:

Do not touch electrical connections before you first ensure that

 

power has been disconnected. Electrical shock can cause serious

 

or fatal injury. Only qualified personnel should attempt the

 

installation, operation and maintenance of this equipment.

WARNING:

Be sure the system is properly grounded before applying power.

 

Do not apply AC power before you ensure that all grounding

 

instructions have been followed. Electrical shock can cause

 

serious or fatal injury. National Electrical Code and Local codes

 

must be carefully followed.

WARNING:

This equipment may be connected to other machinery that has

 

moving parts that are driven by this equipment. Improper use can

 

cause serious or fatal injury. Only qualified personnel should

 

attempt to install operate or maintain this equipment.

WARNING:

Do not by-pass or disable protective devices or safety guards.

 

Safety features are designed to prevent injury to personnel or

 

damage to equipment. These devices can only provide protection if

 

they remain operative.

WARNING:

Disconnect all electrical power from the motor windings and

 

accessory devices before disassembly of the motor. Electrical

 

shock can cause serious or fatal injury.

WARNING:

Do not use these motors in the presence of flammable or

 

combustible vapors or dust. These motors are not designed for

 

atmospheric conditions that require explosion proof operation.

WARNING:

Motors that are to be used in flammable and/or explosive

 

atmospheres must display the UL label on the nameplate.

 

Specific service conditions for these motors are defined in

 

NEC 70-599.

Caution:

Be careful when sliding the motor from its shipping container. Slide

 

the motor from the box onto a level, flat surface to prevent bending.

 

Bending can damage the windings and commutators.

1-2 General Information

MN1800

Page 4 Page 6
Image 5
Page 4 Page 6
Contents MN1800 Linear MotorsTable of Contents Ii Table of Contents MN1800 Indicates a condition that can cause damage to equipment Limited WarrantyOverview Installation, operation and maintenance of this equipment Lifting, installing, operating and maintaining operationsDo not apply AC power before you ensure that all grounding Attempt to install operate or maintain this equipmentStorage ReceivingUnpacking HandlingGeneral Information MN1800 Mounting a Stage to the Machine Base and Payload To Stage Clean RoomLocation Lmac Linear Induction Motor Lmac Connection DiagramLmbr Series Brush DC Linear Servo Motor Lmbl Series Brushless Linear Iron Core Servo Motor InstallationAlternate Installation Refer to Figure Motor Cable Hall Cable Limit Cable AY1763A00 Leadwire ConnectionWire Color Modular Magnet Track Installation Hall Cable Limit Cable Brushless Linear Iron Core Servo Motor Modular Magnet TrackAir Gap Spacing Lmcf Series Brushless Linear Cog Free Servo MotorPin# Color Lmnc Moving Coil TypeLmnm Moving Magnet Type Non Commutated DC Linear Servo Motor Lmpy Series Polynoid Linear Motor Holding Option SwitchingSingle Holding Double HoldingMotor Cable Signal Name Wire Color Leadwire ConnectionLmpy Series Polynoid Linear Motor Holding OptionMaintenance Adjust Air GapAY0165A00 Leadwire Connection 9 pin to flying leads Lmss Series Linear StepperInstallation Mounting the Forcer on the Platen Air Bearing Motor Cleaning the Forcer and PlatenLmss Series Removing the Forcer from the PlatenItems Required but not Included Lmds Series Dual Axis Linear Stepper MotorUnpacking Stage Specifications DisclaimerPositioning Stages LSE Series Enclosed Position Stage General Description Stage specificationsConstruction Bearing typeAY1779A00 LSE with Renishaw Encoder RGH24 Flying Leads LD9124A00 Limit and Home, Axis 1, Internal Pin# Color LD9125A01 Limit only Color Pin# DescriptionLD9137A01 Limit only Color Pin# Description LSE Stage Connector Locations LSC Series Cross Roller Position Stage General Description AY1775A00 Leadwire Connection for LinDrive 15 pin LD9125A02 H-Limit and Home Color Pin# Description AY1759A00 Renishaw RSF Encoder LSS Series Single Bearing Position StageAY1802A00 Stages with Renishaw Encoder RSF Flying Leads AY1801A00 Stages with Renishaw Encoder RGH22 Flying LeadsLD9114A00 Leadwire Connection LD9103A00LXS Connections Female LinDrive Connections Male Pin D Sub Male Motor / Limit Connections Pin Circular Connector MalePin D Sub Female LD9119A01 Color Pin# Description LSX Leadwire Connection Limit Switch PigtailsLD9119A02 Color Pin# Description LD9137A02 Limit and HomePin Encoder Connections Pin Encoder ConnectorCross Roller Type Bearing Bearing Maintenance Recirculating Bearing Rail And BlockTechnical Data Encoder MaintenanceRSF Series MSA6x Enclosed Type Color Description FunctionRSF Series MS6x Open Type Glass Scale Renishaw RGH22 series Open Type Metal Scale Associated Components Renishaw RGH22 series Open Type Metal Scale SpecificationsElgo Mix 4 series Magnetic Type Encoder Head Output Connector Pin AssignmentElgo Mix 5 series Magnetic Type Mix 4 and Mix 5 Dial Settings Resolution using 4x multiplierRequirements Encoder SpecificationsCables and Cable Chain Procedures Additional Cables  Baldor Electric Company MN1800 01 C&J1500 Baldor Electric Company

iMN1800 specifications

The Baldor iMN1800 is a comprehensive industrial motor drive, engineered for a wide range of applications in various sectors such as manufacturing, robotics, and automation. This drive exemplifies Baldor's commitment to innovation, performance, and efficiency, offering users advanced features that cater to modern industrial demands.

At the heart of the iMN1800 is its state-of-the-art motor control technology, designed to provide precise control over motor speed and torque. This is achieved through a sophisticated algorithm that adjusts the motor's performance in real-time, ensuring reliability and efficiency. The iMN1800 is compatible with various forms of electric motors, including AC induction and permanent magnet synchronous motors, making it versatile for numerous applications.

One of the standout features of the Baldor iMN1800 is its energy efficiency. It complies with various energy standards, which not only helps reduce operational costs but also minimizes the environmental impact associated with industrial operations. With an impressive efficiency rating, the iMN1800 contributes to lower energy consumption, making it an economically viable solution for businesses aiming to enhance sustainability.

In terms of connectivity, the iMN1800 incorporates advanced communication protocols such as Ethernet/IP and Modbus, allowing for seamless integration into existing industrial networks. This feature facilitates real-time monitoring and control, empowering operators to make informed decisions based on live data. The user-friendly interface enables quick access to essential parameters for both configuration and diagnostics, ensuring ease of use for technicians and engineers alike.

Moreover, the iMN1800 is built with robust construction materials, ensuring durability in demanding environments. Its rugged design allows it to withstand harsh conditions, including high temperatures and vibrations, common in industrial settings. This reliability contributes to reduced downtime and maintenance costs, promoting a more productive work environment.

The Baldor iMN1800 also features advanced safety mechanisms, including overload protection and short-circuit protection, guaranteeing the safety of both personnel and equipment. These attributes align with modern safety standards, making it a trusted choice for industries that prioritize workplace safety.

In summary, the Baldor iMN1800 is a top-tier industrial motor drive that combines advanced motor control technology, energy efficiency, robust construction, and enhanced safety features. Its flexibility and connectivity make it a valuable asset for diverse industrial applications, ultimately driving operational efficiency and effectiveness.
Top Page Image Contents