Mitsubishi Electronics SKM35ZD-S Choice of operations and features, Choise of operations

Choice of operations and features

Choise of operations

HEAT	Page 9	COOL	Page 9
The unit draws in heat from the outside air, transfers it inside and		Cooling by extracting heat from the room.
heats the room.

DRY	Page 9	AUTO	Page 8
Drying by extracting damp from the room.		Automatic selection of operating mode.

	The Auto mode automati-
	cally selects the operation
Functioning of micro-computer depends on setting and room tem-	mode (HEAT, COOL or
	DRY), depending on the
peratures. It dehumidifies while keeping room temperature almost	room temperature when
constant.	switched on.

Characteristics

Amenity facility Page 13 TIMER procedure Page 11, 12 HI POWER mode Page 9

When using the timer to switch on, the sys-
tem become operational shortly before the
set time, depending on the room tempera-		There are two timers, for ON and OFF.	Turning up the power operates the air condi-
ture so that the desired temperature is		They can be set as desired.	tioner in the power cooling and heating
reached at the set time.
			mode.
	Page 10			Page 9
Adjustment of			ECONOMY mode
airflow

•AIR SCROLL

This function sets the unit at the most suitable angle for blowing, imitating a natural breeze.

• MEMORY FLAP
Once the flap position has been set, the unit will
memorise it and	continue in the same position the
next time.	This is an economic and healthy level of op-
	eration.

– 4 –