Viking F20686, DSOE305TSS manual Oven Settings, Brightness, Degree Format

Page 11

Product Controls

Clocks and Timers

Cook Time and Stop Time (cont.)

To set Stop Time:

1.Set Cook Time, following the steps provided in the previous section.

2.Press “STOP TIME” and “STOP TIME” will be lit on the display.

3.Use numeric keyboard to enter the time you want to stop for cooking.

4.After the time is entered, the display will flash the time. (To cancel stop time, press the “CLEAR” button on the left side of the control panel.)

5.Press “SET” or “STOP TIME” if the stop time is correct. Stop time is set and will begin when the oven is preheated.

Note: Display will show cook time and stop time. If you have entered a time incorrectly, you will hear a long beep and the display will not change.

Note: To cancel stop time during its cycle, press “STOP TIME” and then press the “CLEAR” button on the left side of the oven control. Cooking will continue if the oven is on.

When Stop Time has been reached:

1.Your oven will sound three beeps, and “HOLD” will appear on the display.

•The oven will stay at 150°F in hold mode for 2 hours.

•After 2 hours, the oven will sound four long beeps and shut off.

2.Press “OFF” to turn off the oven manually.

Oven Settings

Settings

Use this function to access, program, and customize special features of your oven. Special features include tones, timeouts, display brightness, and the Sabbath mode.

Brightness

This mode offers users the ability to

decrease or increase the intensity of the brightness of the electronic display panel. Users may choose between four levels of brightness: 25%, 50%, 75%, and 100%.

To customize Brightness level:

1.Press “SETTINGS.” Settings menu will appear in display.

2.Press the up or down arrows until “BRIGHTNESS: 100%” appears in he display. (The % shown is the current brightness level.)

3.Press “ENTER” to change brightness level. Current value will flash.

4.Move up and down arrows to select desired brightness level.

5.Press “ENTER” to confirm brightness level.

6.To exit the Settings menu, press “SETTINGS.”

Degree Format

The oven has been preset to the Fahrenheit temperature scale. With this feature, users can switch to the Celsius temperature scale.

To change Degree Format to Celsius:

1.Press “SETTINGS.” Settings menu will appear in display.

2.Press the up or down arrows until “DEGREES: FAHRENHEIT” appears in the display.

3.Press “ENTER” to change degree format. Current value will flash.

4.Use arrow keys to select “CELSIUS.”

5.Press “ENTER” again to set degree format.

6.To exit the settings menu, press “SETTINGS.”

Product Controls

20

21

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Viking Use & Care Manual Congratulations Table of ContentsGetting Started Recognize Safety Symbols, Words, LabelsTo Prevent Fire or Smoke Damage Electrical Shock Hazard Burn Hazard Oven Before Using OvenSetting the Clock Setting the ClockOven Control Panel Product Oven FeaturesTimer Alarm Cook Time and Stop Time Clocks and TimersSetting the Timer Degree Format Oven SettingsBrightness Description Number Duration Tone Used in… Tones TonesClock Format Tone VolumeTimeouts Description Duration Timeout Used in…Interior Oven Lights Two Pads Sabbath ModeShowroom Mode Lock and UnlockEditing a Recipe Using a RecipeEntering Recipe Name Entering a new RecipeMeat Probe Function Using the OvenPreheat To Set the Automatic Probe FunctionConventional and Convection Cooking Rack PositionsCondensation Pan Placement TipsBaking Tips BakingBake Two-Element Bake Conv Bake Convection BakeConvection Bake Instructions Bake InstructionsDuring Bake Preheat Oven OffDuring TruConvec Preheat Baking ChartTruConvec Instructions Problems Cause Remedy Solving Baking ProblemsConvection Baking Chart Common Baking Problems/RemediesRoasting Tips RoastingConv Roast Convection Roast During Convection Roast Preheat Convection Roast InstructionsDuring Auto Roast Preheat When Set Auto Roast Temperature Is ReachedConventional Roasting Chart Auto Roast InstructionsConv Broil Convection Broil Convection Roasting ChartBroiling Broiling Instructions Broiling TipsConvection Broil Instructions Broiling ChartProofing Warming ModesConvection Dehydrate Convection DefrostCleaning and Maintenance Before starting the Self-Clean cycle Self-Clean CycleReplacing Oven Lights TroubleshootingPower Failure Problem Possible Cause and/or RemedyError Message Problem Correction Error HandlingService Information BUILT-IN Electric Ovens Warranty Warranty

F20686, DSOE305TSS, DSOE305T specifications

The Viking DSOE305T, DSOE305TSS, and F20686 are notable enclosed engine-driven welders that exemplify high performance and reliability in demanding environments. Designed for industrial and commercial applications, these machines deliver robust functionality while maintaining ease of use.

Starting with the DSOE305T model, it boasts a powerful output rating of 305 amps, making it suitable for a variety of welding applications, including MIG, TIG, and stick welding. This versatility is further enhanced by its ability to handle different types of welding electrodes, making it the go-to choice for contractors and fabricators alike. The machine features an integrated circuit breaker, which protects against overloads and ensures longevity in diverse working conditions.

The DSOE305TSS variant adds an extra layer of convenience with its dual voltage capability, allowing operators to switch between 120V and 230V power supplies without the need for additional equipment. This flexibility is particularly advantageous for users working on various job sites where power sources may differ. Additionally, it is equipped with a user-friendly digital display, providing real-time information on output settings and operational status to help navigate through jobs more efficiently.

Equally impressive is the F20686 model, which emphasizes portability without compromising on power. This welder is designed to be lightweight and easily transportable, featuring sturdy yet compact construction. It can be utilized effectively in both workshop settings and on-site locations, making it ideal for a range of industries, from automotive repair to metal fabrication.

All models utilize advanced inverter technology, which not only contributes to their compact size but also significantly improves energy efficiency when compared to traditional welding machines. The ability to deliver a precise arc minimizes spatter, leading to cleaner welds and reduced post-welding cleanup.

Safety is also a paramount consideration in these machines. They come equipped with features such as overheating protection and a safety lock mechanism to prevent unauthorized operation.

In summary, the Viking DSOE305T, DSOE305TSS, and F20686 are engineered to meet the rigorous demands of modern welding applications. Their combination of power, versatility, mobility, and safety features makes them a reliable choice for welders seeking performance and efficiency in their work.
Top Page Image Contents