Viking DSOE305TSS, F20686 manual Clocks and Timers, Setting the Timer, Cook Time and Stop Time

Page 10

Product Controls

Clocks and Timers

Setting the Timer

The timer is designed for accurate timing and is ideal for baking delicate items such as biscuits, cookies, and popovers, and for precise broiling. The timer can be used for timing up to 12 hours. When setting the timer, the time displayed will decrease in 1 minute increments. When the timer counts down to 1 minute, the timer alarm will give one short beep and the display will change to seconds. When the timer reaches 0:00, the alarm will give a long beep.

To set the Timer:

1.Press the “TIMER” button. The timer will display “0:00” and the word “TIMER.”

2.Type in the desired duration time on the electronic number keypad.

3.The timer will start automatically. (To cancel the entry, press the “CLEAR” button on the left side of the control panel before the count down begins and the time is still flashing.)

4.The timer is now set.

Alternate method:

1.Press the “TIMER” button. The timer will display “0:00” and the word “TIMER” will be lit on the display.

 

Press and Release

Press and Hold

 

 

 

▲

Time increases by 1 minute

Time increases by 10 minutes

▼

 

 

Time decreases by 1 minute

Time decreases by 10 minutes

 

 

 

2.Use the up and down arrows to set the timer.

3.Press “SET” or “TIMER” to program the timer. (To cancel the entry, press the “CLEAR” button on the left side of the control panel.)

4.The timer is now set.

Clocks and Timers

Cook Time and Stop Time

With the Viking oven, you can choose what times you need to start and stop cooking your food. The cook time and stop time functions allow you to program your preferences.

Here’s how it works:

It is 2:00 PM and you would like to have your dinner ready at 6:00 PM. By programming your oven with a 2-hour cook time and a 6:00 PM stop time, your oven will delay cooking until 3:50 PM. At 3:50, the oven will begin preheating. At 4:00 PM, the oven will begin its 2-hour cook time.

Cook Time and Stop Time facts:

Both ovens can be set individually for cook time and stop time functions.

To set Cook Time:

1.Select “UPPER OVEN” or “LOWER OVEN”.

2.Select an oven function and temperature before setting Cook Time and Stop Time functions.

3.Press “COOK TIME” and the display will flash “0:00” and “COOK TIME” will be lit below.

4.Use numeric keyboard to enter the amount of time needed for cooking.

5.After the time is entered, the display will show “COOK TIME” under the timer field. (To cancel the entry, press the “CLEAR” button on the left side of the control panel.)

6.Press “SET” or “ENTER” if the cook time is correct. Cook time is set.

Note: To cancel cook time during its cycle, press “COOK TIME” and then press the “CLEAR” button on the left side of the oven control. Cooking will continue if the oven is on.

Product Controls

18

19

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Viking Use & Care Manual Table of Contents CongratulationsRecognize Safety Symbols, Words, Labels Getting StartedTo Prevent Fire or Smoke Damage Electrical Shock Hazard Burn Hazard Setting the Clock Before Using OvenSetting the Clock OvenOven Control Panel Timer Alarm Oven FeaturesProduct Setting the Timer Clocks and TimersCook Time and Stop Time Brightness Oven SettingsDegree Format Tones Description Number Duration Tone Used in… TonesDescription Duration Timeout Used in… Tone VolumeTimeouts Clock FormatLock and Unlock Sabbath ModeShowroom Mode Interior Oven Lights Two PadsEntering a new Recipe Using a RecipeEntering Recipe Name Editing a RecipeTo Set the Automatic Probe Function Using the OvenPreheat Meat Probe FunctionRack Positions Conventional and Convection CookingPan Placement Tips CondensationConv Bake Convection Bake BakingBake Two-Element Bake Baking TipsOven Off Bake InstructionsDuring Bake Preheat Convection Bake InstructionsTruConvec Instructions Baking ChartDuring TruConvec Preheat Common Baking Problems/Remedies Solving Baking ProblemsConvection Baking Chart Problems Cause RemedyConv Roast Convection Roast RoastingRoasting Tips Convection Roast Instructions During Convection Roast PreheatAuto Roast Instructions When Set Auto Roast Temperature Is ReachedConventional Roasting Chart During Auto Roast PreheatBroiling Convection Roasting ChartConv Broil Convection Broil Broiling Tips Broiling InstructionsBroiling Chart Convection Broil InstructionsConvection Defrost Warming ModesConvection Dehydrate ProofingCleaning and Maintenance Self-Clean Cycle Before starting the Self-Clean cycleProblem Possible Cause and/or Remedy TroubleshootingPower Failure Replacing Oven LightsService Information Error HandlingError Message Problem Correction Warranty BUILT-IN Electric Ovens Warranty

F20686, DSOE305TSS, DSOE305T specifications

The Viking DSOE305T, DSOE305TSS, and F20686 are notable enclosed engine-driven welders that exemplify high performance and reliability in demanding environments. Designed for industrial and commercial applications, these machines deliver robust functionality while maintaining ease of use.

Starting with the DSOE305T model, it boasts a powerful output rating of 305 amps, making it suitable for a variety of welding applications, including MIG, TIG, and stick welding. This versatility is further enhanced by its ability to handle different types of welding electrodes, making it the go-to choice for contractors and fabricators alike. The machine features an integrated circuit breaker, which protects against overloads and ensures longevity in diverse working conditions.

The DSOE305TSS variant adds an extra layer of convenience with its dual voltage capability, allowing operators to switch between 120V and 230V power supplies without the need for additional equipment. This flexibility is particularly advantageous for users working on various job sites where power sources may differ. Additionally, it is equipped with a user-friendly digital display, providing real-time information on output settings and operational status to help navigate through jobs more efficiently.

Equally impressive is the F20686 model, which emphasizes portability without compromising on power. This welder is designed to be lightweight and easily transportable, featuring sturdy yet compact construction. It can be utilized effectively in both workshop settings and on-site locations, making it ideal for a range of industries, from automotive repair to metal fabrication.

All models utilize advanced inverter technology, which not only contributes to their compact size but also significantly improves energy efficiency when compared to traditional welding machines. The ability to deliver a precise arc minimizes spatter, leading to cleaner welds and reduced post-welding cleanup.

Safety is also a paramount consideration in these machines. They come equipped with features such as overheating protection and a safety lock mechanism to prevent unauthorized operation.

In summary, the Viking DSOE305T, DSOE305TSS, and F20686 are engineered to meet the rigorous demands of modern welding applications. Their combination of power, versatility, mobility, and safety features makes them a reliable choice for welders seeking performance and efficiency in their work.
Top Page Image Contents