Viking F20686, DSOE305T manual During Bake Preheat, Oven Off, Convection Bake Instructions

Page 20

Operation

Baking

Bake Instructions

This function is recommended for single-rack baking. Use this setting for baking, roasting, and casseroles.

To use Bake:

1.Arrange the oven racks in the desired positions before heating the oven.

2.Select “UPPER OVEN” or “LOWER OVEN.”

3.Set the Oven Function Selector to “BAKE.” Temperature display flashes a preset temperature of 350°F.

4.Set the temperature using one of the following two methods:

a. Confirm preset temperature and press “SET” or “ENTER.” The oven will begin Bake Preheat immediately.

OR

b. Change the temperature by typing the desired temperature on the numeric keypad or using the up and down arrow keys. Press “SET” or “ENTER” when finished. The oven will begin Bake Preheat immediately.

During Bake Preheat

The display will alternate between showing the set baking temperature and the actual preheat temperature every 5 seconds. When the set baking temperature is reached, one long beep will sound and the display will show “BAKE.” Open oven door and put food in the oven.

To change set temperature during preheat stage:

 

Press and Release

 

 

▲

Temperature increases by 5°F (2°C)

▼

 

Temperature decreases by 5°F (2°C)

 

 

Oven Off

The oven will continue operating until you press the “OFF” button for the oven you are using. To turn the oven off, press the “OFF” button on the control panel display. One beep will sound and the oven will turn off.

Baking

Convection Bake Instructions

This function is recommended for multi-rack baking. Foods can be baked and roasted at the same time with minimal taste transfer, even when different dishes are involved, such as cakes, fish, or meat.

To use Convection Bake:

1.Arrange the oven racks in the desired positions before heating the oven.

2.Select “UPPER OVEN” or “LOWER OVEN.”

3.Set the Oven Function Selector to “CONV. BAKE.” Temperature display flashes a preset temperature of 325°F.

4.Set the temperature using one of the following two methods:

a.Confirm preset temperature and press “SET” or “ENTER.” The oven will begin Convection Bake Preheat immediately.

OR

b. Change the temperature by typing the desired temperature on the numeric keypad or using the up and down arrow keys. Press “SET” or “ENTER” when finished. The oven will begin Convection Bake Preheat immediately.

During Convection Bake Preheat

The display will alternate between showing the set baking temperature and the actual preheat temperature every 5 seconds. When the set baking temperature is reached, one long beep will sound and the display will show “CONV. BAKE.” Open oven door and put food in oven.

To change set temperature during preheat stage:

 

Press and Release

 

 

▲

Temperature increases by 5°F (2°C)

▼

 

Temperature decreases by 5°F (2°C)

 

 

Oven Off

The oven will continue operating until you press the “OFF” button for the oven you are using. To turn the oven off, press the “OFF” button on the control panel display. One beep will sound and the oven will turn off.

Operation

38

39

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Viking Use & Care Manual Table of Contents CongratulationsRecognize Safety Symbols, Words, Labels Getting StartedTo Prevent Fire or Smoke Damage Electrical Shock Hazard Burn Hazard Before Using Oven Setting the ClockSetting the Clock OvenOven Control Panel Product Oven FeaturesTimer Alarm Cook Time and Stop Time Clocks and TimersSetting the Timer Degree Format Oven SettingsBrightness Tones Description Number Duration Tone Used in… TonesTone Volume TimeoutsDescription Duration Timeout Used in… Clock FormatSabbath Mode Showroom ModeLock and Unlock Interior Oven Lights Two PadsUsing a Recipe Entering Recipe NameEntering a new Recipe Editing a RecipeUsing the Oven PreheatTo Set the Automatic Probe Function Meat Probe FunctionRack Positions Conventional and Convection CookingPan Placement Tips CondensationBaking Bake Two-Element BakeConv Bake Convection Bake Baking TipsBake Instructions During Bake PreheatOven Off Convection Bake InstructionsDuring TruConvec Preheat Baking ChartTruConvec Instructions Solving Baking Problems Convection Baking ChartCommon Baking Problems/Remedies Problems Cause RemedyRoasting Tips RoastingConv Roast Convection Roast Convection Roast Instructions During Convection Roast PreheatWhen Set Auto Roast Temperature Is Reached Conventional Roasting ChartAuto Roast Instructions During Auto Roast PreheatConv Broil Convection Broil Convection Roasting ChartBroiling Broiling Tips Broiling InstructionsBroiling Chart Convection Broil InstructionsWarming Modes Convection DehydrateConvection Defrost ProofingCleaning and Maintenance Self-Clean Cycle Before starting the Self-Clean cycleTroubleshooting Power FailureProblem Possible Cause and/or Remedy Replacing Oven LightsError Message Problem Correction Error HandlingService Information Warranty BUILT-IN Electric Ovens Warranty

F20686, DSOE305TSS, DSOE305T specifications

The Viking DSOE305T, DSOE305TSS, and F20686 are notable enclosed engine-driven welders that exemplify high performance and reliability in demanding environments. Designed for industrial and commercial applications, these machines deliver robust functionality while maintaining ease of use.

Starting with the DSOE305T model, it boasts a powerful output rating of 305 amps, making it suitable for a variety of welding applications, including MIG, TIG, and stick welding. This versatility is further enhanced by its ability to handle different types of welding electrodes, making it the go-to choice for contractors and fabricators alike. The machine features an integrated circuit breaker, which protects against overloads and ensures longevity in diverse working conditions.

The DSOE305TSS variant adds an extra layer of convenience with its dual voltage capability, allowing operators to switch between 120V and 230V power supplies without the need for additional equipment. This flexibility is particularly advantageous for users working on various job sites where power sources may differ. Additionally, it is equipped with a user-friendly digital display, providing real-time information on output settings and operational status to help navigate through jobs more efficiently.

Equally impressive is the F20686 model, which emphasizes portability without compromising on power. This welder is designed to be lightweight and easily transportable, featuring sturdy yet compact construction. It can be utilized effectively in both workshop settings and on-site locations, making it ideal for a range of industries, from automotive repair to metal fabrication.

All models utilize advanced inverter technology, which not only contributes to their compact size but also significantly improves energy efficiency when compared to traditional welding machines. The ability to deliver a precise arc minimizes spatter, leading to cleaner welds and reduced post-welding cleanup.

Safety is also a paramount consideration in these machines. They come equipped with features such as overheating protection and a safety lock mechanism to prevent unauthorized operation.

In summary, the Viking DSOE305T, DSOE305TSS, and F20686 are engineered to meet the rigorous demands of modern welding applications. Their combination of power, versatility, mobility, and safety features makes them a reliable choice for welders seeking performance and efficiency in their work.
Top Page Image Contents