KitchenAid 2316565B manual ClassicSeries Custom Panels, Door Panels for Dispenser Models

ClassicSeries Custom Panels

If you plan to install custom wood panels, you will need to create the panels yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings for panel specifications.

IMPORTANT: Panels weighing more than recommended may cause damage to your refrigerator.

NOTE: Dimensions shown have a (±) ¹⁄₁₆" (1.5 mm) tolerance.

Door Panels for Dispenser Models

The freezer panel should not weigh more than 40 lbs (18.1 kg). The refrigerator panel should not weigh more than 50 lbs (23 kg).

NOTE: Dispenser cut-out is centered left-to-right.

Panels that are more than ¹⁄₄" (6.35 mm) thick must be routed. If panels are less than ¹⁄₄" (6.35 mm) thick, install a filler panel between the doors and decorative panels.

Top Grille Panel

The top grille panel should not weigh more than 10 lbs (4.5 kg).

A

7"

(17.8 cm)

Model A

3634¹⁄₄" (87.0 cm)

4240¹⁄₄" (102.2 cm)

4846¹⁄₄" (117.5 cm)

A

10⁷⁄₈"

(27.6 cm)

14¹⁄₄"

(36.2 cm)

B

70⁷⁄₁₆"

(179 cm)

Door Panels for Non-dispenser Models

The freezer panel should not weigh more than 40 lbs (18.1 kg). The refrigerator panel should not weigh more than 50 lbs (23 kg).

A B

70¹⁄₂"

(179.1 cm)

Model	A	B
36	14¹⁄₄" (36.2 cm)	19¹⁄₄" (48.9 cm)
42	16³⁄₄" (42.6 cm)	22³⁄₄" (57.8 cm)
48	19¹⁄₄" (48.9 cm)	26¹⁄₄" (66.7 cm)

33³⁄₄"

(85.7 cm)

Model	A	B
36	14¹⁄₄" (36.2 cm)	19¹⁄₄" (48.9 cm)
42	16³⁄₄" (42.6 cm)	22³⁄₄" (57.8 cm)
48	19¹⁄₄" (48.9 cm)	26¹⁄₄" (66.7 cm)

Top Grille Panel – Routing Requirements

If the custom panels are thicker than ¹⁄₄" (6.35 mm), the top and bottom edges of the top panel should be edge routed ¹⁄₂" (1.3 cm) and ³⁄₈" (9.5 mm), respectively. Both ends should be edge routed ⁷⁄₈" (2.2 cm) as shown.

¹⁄₄"				34¹⁄₈" (86.68 cm)				¹⁄₄"
(6.35 mm)			Top		Top			(6.35 mm)
max.			Grille		Grille			max.
		¹⁄₄"					¹⁄₄"
	(6.35 mm)					(6.35 mm)

15