KitchenAid W10526086A installation instructions Natural Gas Conversion

Natural Gas Conversion

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Install anti-tip bracket to floor or wall per installation instructions.

Slide range back so rear range foot is engaged in the slot of the anti-tip bracket.

Re-engage anti-tip bracket if range is moved.

2.Unscrew the regulator cap and remove the plastic cover.

A

B

A. Plastic cover

B. Regulator cap

3.Flip the regulator cap over and replace the plastic cover.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

1.Turn manual shutoff valve to the closed position.

B

B

A

C

A

C

A. To range

B. Shutoff valve (closed position)

C. Gas supply line

2.Unplug range or disconnect power.

To Convert Gas Pressure Regulator

1.Locate gas pressure regulator at the rear of the range.

A

A. Gas pressure regulator

IMPORTANT: Do not remove the gas pressure regulator.

A. LP gas position

B. Natural gas position

C. Plastic cover

4.Screw the regulator cap securely back into place. Do not overtighten.

To Convert Surface Burners

1.If the burner grates are installed, remove them.

2.Remove the burner caps.

3.Using a Phillips or T20® Torx®† screwdriver, remove the burner base.

A

C

B

D

A. Burner cap	C. Burner base screws
B. Gas tube opening	D. Burner base

19