6English
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
General description (Fig. 1)
ASpeed selector
BOn/off button
CTurbo speed button
DMotor unit
ERelease buttons
FBlender bar with integrated blade unit
GProtective cover of blender bar
HBeaker
IBeaker lid
JWhisk
KWhisk coupling unit
LProtective cover of blade unit
MPusher
NLid of bowl
OCombination disc (slicing/shredding)
PTool holder
QBlade unit
RLid release button
SBowl
Important
Read this user manual carefully before you use the appliance and save it for future reference.
Danger
-- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. Only use a moist cloth to clean the motor unit.
Warning
-- Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
-- Do not use the appliance if the plug, the mains cord or other parts are damaged.
-- If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
-- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-- Children should be supervised to ensure that they do not play with the appliance.
-- Never use your fingers or an object (e.g. a spatula) to push ingredients down the feeding tube while the appliance is operating. Only use the pusher for this purpose.
-- Do not touch the cutting edges of the blade units and the combination disc, especially when the appliance is plugged in.Their cutting edges are very sharp.
-- If the blade unit gets stuck, unplug the appliance before you remove the ingredients that block the blade unit.
-- Be very careful when you handle or clean the blade units and the combination disc.Their cutting edges are very sharp. Be especially careful when you clean them and when you empty the bowl.