Jenn-Air W10282143B manual ICE Maker USE, How Your Ice Maker Works, Using the Controls

Page 11

Water running over the evaporator plate may make a splashing sound.

Water running from the evaporator plate to the water reservoir may make a splashing sound.

As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your ice maker.

You may hear air being forced over the condenser by the condenser fan.

During the harvest cycle, you may hear a “thud” when the ice sheet slides from the evaporator onto the cutter grid.

When you first start the ice maker, you may hear water running continuously. The ice maker is programmed to run a rinse cycle before it begins to make ice.

ICE MAKER USE

How Your Ice Maker Works

When you first start your ice maker, the water pan will fill and the system will rinse itself before starting to make ice. The rinsing process takes about 5 minutes.

Under normal operating conditions, the ice maker will cycle at preset temperatures. The ice level sensor located in the ice storage bin will monitor the ice levels.

IMPORTANT:

If the water supply to the ice maker is turned off, be sure to set the ice maker control to OFF.

The ice maker is designed to make clear ice from the majority of water sources on a daily basis. If your results are unsatisfactory, your water may need to be filtered or treated.

The Ice Making Process

1.Water is constantly circulated over a freezing plate. As the water freezes into ice, the minerals in the water are rejected. This produces a sheet of ice with a low mineral content.

2.When the desired thickness is reached, the ice sheet is released and slides onto a cutter grid. The grid divides the sheet into individual cubes.

3.The water containing the rejected minerals is drained after each freezing cycle.

4.Fresh water enters the machine for the next ice making cycle.

5.Cubes fall into the storage bin. When the bin is full, the ice maker shuts off automatically and restarts when more ice is needed. The ice bin is not refrigerated, and some melting will occur. The amount of melting varies with room temperature.

NOTE: As the room and water temperatures vary, so will the amount of ice produced and stored. This means that higher operating temperatures result in reduced ice production.

Using the Controls

1.To start the normal ice making cycle, press ON.

2.To stop ice maker operation, press OFF.

NOTES:

Pressing the ON/OFF switch does not shut off power to the ice maker.

Allow 24 hours to produce the first batch of ice. Discard the first batch produced.

Speed Ice Mode

Select the Speed Ice feature when you have an upcoming need for a large amount of ice and the ice bin is low or empty. The Speed Ice mode will produce a greater quantity of ice in a 24-hour period.

Press and hold SPEED ICE while the ice maker is on. The indicator light will illuminate.

Press and hold SPEED ICE again to turn off the Speed Ice feature. The indicator light will turn off.

Service

The service light indicates when service is needed. If the service light turns on, turn the ice maker off and back on. If the service light turns on again, call for service.

Clean/Reset

The Clean/Reset Status light will help you know when it is time to clean your ice maker. The light will change to yellow. This tells you it is almost time to clean your ice maker. It is recommended that you clean the ice maker when the status light changes to red OR ice production decreases significantly. To clean your ice maker, see “Ice Maker System” in the “Cleaning” section.

11

Image 11
Contents W10282143B USE & Care GuideManual DE USO Y Cuidado Guide D’UTILISATION ET D’ENTRETIENTable DES Matières Table of ContentsÍndice Tools and Parts ICE Maker SafetyInstallation Instructions Custom Panel DimensionsTop of Panel Option 1 Without Hinge-Side SpacerOption 2 With Hinge-Side Spacer Front of PanelLocation Requirements Unpack the Ice MakerRecommended grounding method Electrical RequirementsWater Supply Requirements LevelingRear View Connecting the Water LineConnect Water Supply Gravity Drain System Install Custom Overlay PanelConnecting the Drain Drain Connection#8 x ¹⁄₂ Pan-head wood screw Adhesive pads Custom panel Ice Maker DoorRemove Door Hinge pinNormal Sounds How Your Ice Maker Works Using the ControlsICE Maker USE Ice Maker System CleaningICE Maker Care Exterior SurfacesTo shut down the ice maker Vacation and Moving CareInterior Components Your ice maker will not operate TroubleshootingFor ice makers with a drain pump installed Ice Maker OperationIce Quality Assistance or ServicePlumbing Problems Ice ProductionDisclaimer of Representations Outside of Warranty JENN-AIRICE Maker WarrantyThree Year Limited Warranty Parts and Labor Items Excluded from WarrantyHerramientas y piezas Dimensiones del panel hecho La medidaSeguridad DE LA Fábrica DE Hielo Instrucciones DE InstalaciónParte superior del panel Opción 1 Sin el espaciador del lado de la bisagraOpción 2 Con el espaciador del lado de la bisagra Frente del panelRequisitos de ubicación Desempaque la fábrica de hieloMétodo recomendado para la conexión a tierra Requisitos eléctricosRequisitos del suministro de agua NivelaciónVista Posterior Conexión del suministro de aguaConexión de la tubería de agua Conexión del desagüe Conexión del desagüeSistema de desagüe por gravedad Sistema de la bomba de desagüe en algunos modelosSaque la puerta Instale el panel de revestimiento Hecho a la medidaPuerta de la fábrica de hielo Volver a colocar la puerta Bisagra superiorBisagra inferior Invertir las bisagrasProceso de elaboración de hielo USO DE LA Fábrica DE HieloSonidos normales Cómo funciona su fábrica de hieloLimpieza Cuidado DE LA Fábrica DE HieloUso de los controles Tapa de la rejilla de corte Tornillos CondensadorComponentes interiores Un condensador sucio u obstruidoTornillo de mariposa Soporte de la pala para el hielo Cuidado durante las vacaciones y MudanzasPara apagar la fábrica de hielo Producción de hielo Solución DE ProblemasFuncionamiento de la fábrica de hielo Calidad del hielo Problemas de plomeríaAyuda O Servicio Técnico Exclusión DE Garantías Implícitas Garantía DE LA Fábrica DE Hielo JENN-AIRExclusiones DE LA Garantía Esta garantía limitada no cubreExclusión DE Declaraciones Fuera DE LA Garantía Outillage et pièces Instructions D’INSTALLATIONDimensions du panneau personnalisé Sécurité DE LA Machine À GlaçonsPartie supérieure du panneau Option 1 Sans cale despacement côté charnièreOption 2 Avec cale despacement côté charnière Avant du panneauDéballage de la machine à glaçons Exigences demplacementNivellement Méthode de mise à la terre recommandéeSpécifications électriques Spécifications de l’alimentation en eauVUE Arrière Raccordement à la canalisation d’eauRaccordement du tuyau d’eau Raccordement du drain de vidange Raccordement au drain de vidangeVidange par gravité Système avec pompe de vidange sur certains modèlesAxe de la charnière Installation du panneau décoratif personnaliséPorte de la machine à glaçons Dépose de la porteCharnière inférieure Réinstallation de la porteInversion des charnières Charnière supérieureFabrication de la glace Utilisation DE LA Machine GlaçonsSons normaux Fonctionnement de la machine GlaçonsNettoyage Utilisation des commandesEntretien DE LA Machine Glaçons Bac à eau Vis à ailette du bac à eau Capuchon de vidange CondenseurComposants intérieurs Un condenseur sale ou obstruéVis à ailette Support de pelle à glace Précautions à prendre avant les vacances ou un déménagementArrêt de la machine à glaçons La machine à glaçons semble bruyante DépannageProduction de glaçons La machine à glaçons ne fonctionne pasProblèmes de plomberie Assistance OU ServiceQualité des glaçons La présente garantie limitée ne couvre pas Garantie DE Machine À Glaçons JENN-AIRGarantie Limitée DE Trois ANS Pièces ET MAIN-D’ŒUVRE Éléments Exclus DE LA Garantie2011 All rights reserved W10282143B

W10282143B specifications

The Jenn-Air W10282143B is a high-performance appliance that exemplifies the brand's commitment to innovation and quality in kitchen technology. Designed to cater to the needs of modern culinary enthusiasts, this model integrates advanced features and functionalities that simplify meal preparation while enhancing cooking experiences.

One of the standout features of the Jenn-Air W10282143B is its high-efficiency cooling system. This system ensures that food items are stored at optimal temperatures, preserving freshness for an extended period. The unit is also equipped with adjustable shelving, allowing users to customize the interior layout to accommodate various food items, from large platters to delicate produce. This versatility is a significant advantage for households with diverse storage needs.

Technologically, the Jenn-Air W10282143B incorporates smart connectivity features. Through Wi-Fi integration, users can control the appliance remotely via a dedicated app. This means you can adjust settings, receive alerts, and even monitor energy usage from your smartphone. This level of control and convenience is ideal for busy individuals and families who are always on the go.

Another key characteristic of the Jenn-Air W10282143B is its sleek and modern design. The appliance features a stainless-steel exterior that not only enhances its aesthetic appeal but also provides superior durability and easy maintenance. Fingerprint-resistant finishes prevent smudges and keep the surface looking clean and polished, contributing to a tidy kitchen environment.

In terms of energy efficiency, the Jenn-Air W10282143B meets stringent industry standards. It is designed to consume less electricity compared to traditional models, making it an environmentally friendly choice that helps to reduce utility bills without compromising performance.

Safety features are paramount in this design. The model includes automatic shut-off capabilities and safety locks, providing peace of mind for households with children or pets. Furthermore, the intuitive control panel is user-friendly, allowing everyone in the household to operate the appliance with ease.

Overall, the Jenn-Air W10282143B is a perfect blend of style, functionality, and smart technology. With its user-centric design and commitment to performance, it stands out as a reliable kitchen companion for anyone looking to enhance their culinary journey. The combination of innovative features and an elegant aesthetic makes this model a valuable addition to any modern kitchen.