Jenn-Air W10282143B manual ICE Maker Safety, Installation Instructions, Tools and Parts

Page 3

ICE MAKER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER

WARNING

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic

precautions:

■Plug into a grounded 3 prong outlet.

■Do not remove ground prong.

■Do not use an adapter.

■Do not use an extension cord.

■Disconnect power before cleaning.

■Disconnect power before servicing.

■Replace all parts and panels before operating.

■Use two or more people to move and install ice maker.

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Tools and Parts

TOOLS NEEDED:

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed here.

■

Cordless drill

■

Masking tape

■

Phillips screwdriver

■

Tape measure

■

Router or planer

■ Towel or piece of

■

Pencil

 

cardboard

 

 

PARTS NEEDED:

Custom Overlay Door Panel—See “Custom Panel Installation Instructions,” #8 x ¹⁄₂" pan head wood screws (8)

PARTS SUPPLIED:

■Adhesive pads (4)

Custom Panel Dimensions

If you plan to install a custom overlay panel, you will need to make the panel yourself or consult a qualified cabinetmaker or carpenter.

IMPORTANT:

■The thickness of the overlay panel must be ³⁄₄" (1.91 cm).

■Overlay panel must not weigh more than 8 lbs (3.62 kg).

■Overlay panels weighing more than recommended may cause damage to your ice maker.

■Match wood grain direction with that of adjacent cabinets.

■Sand panel edges to provide a smooth finish.

■Use moisture sealer on both sides and all edges of the panel to avoid damage from moisture.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents W10282143B USE & Care GuideManual DE USO Y Cuidado Guide D’UTILISATION ET D’ENTRETIENTable of Contents ÍndiceTable DES Matières Tools and Parts ICE Maker SafetyInstallation Instructions Custom Panel DimensionsTop of Panel Option 1 Without Hinge-Side SpacerOption 2 With Hinge-Side Spacer Front of PanelLocation Requirements Unpack the Ice MakerRecommended grounding method Electrical RequirementsWater Supply Requirements LevelingConnecting the Water Line Connect Water SupplyRear View Gravity Drain System Install Custom Overlay PanelConnecting the Drain Drain Connection#8 x ¹⁄₂ Pan-head wood screw Adhesive pads Custom panel Ice Maker DoorRemove Door Hinge pinNormal Sounds Using the Controls ICE Maker USEHow Your Ice Maker Works Ice Maker System CleaningICE Maker Care Exterior SurfacesVacation and Moving Care Interior ComponentsTo shut down the ice maker Your ice maker will not operate TroubleshootingFor ice makers with a drain pump installed Ice Maker OperationIce Quality Assistance or ServicePlumbing Problems Ice ProductionDisclaimer of Representations Outside of Warranty JENN-AIRICE Maker WarrantyThree Year Limited Warranty Parts and Labor Items Excluded from WarrantyHerramientas y piezas Dimensiones del panel hecho La medidaSeguridad DE LA Fábrica DE Hielo Instrucciones DE InstalaciónParte superior del panel Opción 1 Sin el espaciador del lado de la bisagraOpción 2 Con el espaciador del lado de la bisagra Frente del panelRequisitos de ubicación Desempaque la fábrica de hieloMétodo recomendado para la conexión a tierra Requisitos eléctricosRequisitos del suministro de agua NivelaciónConexión del suministro de agua Conexión de la tubería de aguaVista Posterior Conexión del desagüe Conexión del desagüeSistema de desagüe por gravedad Sistema de la bomba de desagüe en algunos modelosInstale el panel de revestimiento Hecho a la medida Puerta de la fábrica de hieloSaque la puerta Volver a colocar la puerta Bisagra superiorBisagra inferior Invertir las bisagrasProceso de elaboración de hielo USO DE LA Fábrica DE HieloSonidos normales Cómo funciona su fábrica de hieloCuidado DE LA Fábrica DE Hielo Uso de los controlesLimpieza Tapa de la rejilla de corte Tornillos CondensadorComponentes interiores Un condensador sucio u obstruidoCuidado durante las vacaciones y Mudanzas Para apagar la fábrica de hieloTornillo de mariposa Soporte de la pala para el hielo Solución DE Problemas Funcionamiento de la fábrica de hieloProducción de hielo Problemas de plomería Ayuda O Servicio TécnicoCalidad del hielo Exclusión DE Garantías Implícitas Garantía DE LA Fábrica DE Hielo JENN-AIRExclusiones DE LA Garantía Esta garantía limitada no cubreExclusión DE Declaraciones Fuera DE LA Garantía Outillage et pièces Instructions D’INSTALLATIONDimensions du panneau personnalisé Sécurité DE LA Machine À GlaçonsPartie supérieure du panneau Option 1 Sans cale despacement côté charnièreOption 2 Avec cale despacement côté charnière Avant du panneauDéballage de la machine à glaçons Exigences demplacementNivellement Méthode de mise à la terre recommandéeSpécifications électriques Spécifications de l’alimentation en eauRaccordement à la canalisation d’eau Raccordement du tuyau d’eauVUE Arrière Raccordement du drain de vidange Raccordement au drain de vidangeVidange par gravité Système avec pompe de vidange sur certains modèlesAxe de la charnière Installation du panneau décoratif personnaliséPorte de la machine à glaçons Dépose de la porteCharnière inférieure Réinstallation de la porteInversion des charnières Charnière supérieureFabrication de la glace Utilisation DE LA Machine GlaçonsSons normaux Fonctionnement de la machine GlaçonsUtilisation des commandes Entretien DE LA Machine GlaçonsNettoyage Bac à eau Vis à ailette du bac à eau Capuchon de vidange CondenseurComposants intérieurs Un condenseur sale ou obstruéPrécautions à prendre avant les vacances ou un déménagement Arrêt de la machine à glaçonsVis à ailette Support de pelle à glace La machine à glaçons semble bruyante DépannageProduction de glaçons La machine à glaçons ne fonctionne pasAssistance OU Service Qualité des glaçonsProblèmes de plomberie La présente garantie limitée ne couvre pas Garantie DE Machine À Glaçons JENN-AIRGarantie Limitée DE Trois ANS Pièces ET MAIN-D’ŒUVRE Éléments Exclus DE LA Garantie2011 All rights reserved W10282143B

W10282143B specifications

The Jenn-Air W10282143B is a high-performance appliance that exemplifies the brand's commitment to innovation and quality in kitchen technology. Designed to cater to the needs of modern culinary enthusiasts, this model integrates advanced features and functionalities that simplify meal preparation while enhancing cooking experiences.

One of the standout features of the Jenn-Air W10282143B is its high-efficiency cooling system. This system ensures that food items are stored at optimal temperatures, preserving freshness for an extended period. The unit is also equipped with adjustable shelving, allowing users to customize the interior layout to accommodate various food items, from large platters to delicate produce. This versatility is a significant advantage for households with diverse storage needs.

Technologically, the Jenn-Air W10282143B incorporates smart connectivity features. Through Wi-Fi integration, users can control the appliance remotely via a dedicated app. This means you can adjust settings, receive alerts, and even monitor energy usage from your smartphone. This level of control and convenience is ideal for busy individuals and families who are always on the go.

Another key characteristic of the Jenn-Air W10282143B is its sleek and modern design. The appliance features a stainless-steel exterior that not only enhances its aesthetic appeal but also provides superior durability and easy maintenance. Fingerprint-resistant finishes prevent smudges and keep the surface looking clean and polished, contributing to a tidy kitchen environment.

In terms of energy efficiency, the Jenn-Air W10282143B meets stringent industry standards. It is designed to consume less electricity compared to traditional models, making it an environmentally friendly choice that helps to reduce utility bills without compromising performance.

Safety features are paramount in this design. The model includes automatic shut-off capabilities and safety locks, providing peace of mind for households with children or pets. Furthermore, the intuitive control panel is user-friendly, allowing everyone in the household to operate the appliance with ease.

Overall, the Jenn-Air W10282143B is a perfect blend of style, functionality, and smart technology. With its user-centric design and commitment to performance, it stands out as a reliable kitchen companion for anyone looking to enhance their culinary journey. The combination of innovative features and an elegant aesthetic makes this model a valuable addition to any modern kitchen.
Top Page Image Contents