Jenn-Air W10282143B Vacation and Moving Care, Interior Components, To shut down the ice maker

Page 13

Interior Components

1.Unplug ice maker or disconnect power.

2.Open the storage bin door and remove any ice that is in the bin.

3.Remove the drain cap from the water pan and drain thoroughly. Replace the drain cap securely on the water pan. If the drain cap is loose, water will empty from the water pan, and you will have either thin ice or no ice.

4.Remove the two screws that hold the cutter grid cover in place and remove the cutter grid cover.

5.Unplug the wiring harness from the left side of the cutter grid.

A

B

A. Cutter grid cover

B.Screws

6.Unplug the ice level sensor from the right side of the cutter grid. Pull the ice level sensor down and forward away from the cutter grid.

7.Remove the right-hand and left-hand screws. Lift the cutter grid up and out.

NOTE: Make sure the plastic spacer from the right-hand side of the cutter grid bracket stays with the cutter grid.

D

A

 

B

E

C

F

 

A. Cutter grid harness

D. Ice level sensor harness

B. Screw

E. Plastic spacer

C. Cutter grid

F. Screw

8.Remove the two thumb screws that hold the water pan in place. Push down with one hand on the front of the pan while pulling forward on the bottom back side.

B

A

B

C

A. Water pan

B. Water pan thumb screws

C. Drain cap

9.Remove, clean and replace the ice scoop and ice scoop holder.

■After removing the ice scoop, remove the holder by removing the two thumb screws.

■Wash the ice scoop holder along with the other interior components using the following instructions.

■Replace the ice scoop holder by replacing the thumb screws.

A

B

A. Thumb screw

B. Ice scoop holder

10.Wash the interior components (cutter grid, exterior of hoses, and water pan) and the storage bin, door gasket, ice scoop, and ice scoop holder with mild soap or detergent and warm water. Rinse in clean water. Then clean the same parts with a solution of 1 tbs (15 mL) of household bleach in 1 gal. (3.8 L) warm water. Rinse again thoroughly in clean water.

NOTE: Do not remove hoses. Do not wash plastic parts in dishwasher. They cannot withstand temperatures above 145°F (63°C).

11.Replace water pan by pushing back on the bottom with one hand while pushing up and back on the top. Secure the water pan by replacing both screws.

12.Check the following:

■Drain cap from the water pan is securely in place. If the drain cap is loose, water will empty from the water pan, and you will have either thin ice or no ice.

■Hose from water pan is inserted into storage bin drain opening.

13.Slide the cutter grid back into place and secure it by replacing the right-hand screw and plastic spacer. Then tighten the left- hand screw. Reconnect the cutter grid harness and the ice level sensor harness.

14.Replace the cutter grid cover and the two screws.

15.Gently wipe the control panel with a soft, clean dishcloth using warm water and a mild liquid dish detergent.

16.Plug in ice maker or reconnect power.

17.After cleaning, make sure that all controls are set properly and that no control indicators are flashing.

Vacation and Moving Care

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

To shut down the ice maker:

1.Unplug ice maker or disconnect power.

2.Remove all ice from storage bin.

3.Shut off the water supply.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Manual DE USO Y Cuidado USE & Care GuideGuide D’UTILISATION ET D’ENTRETIEN W10282143BÍndice Table of ContentsTable DES Matières Installation Instructions ICE Maker SafetyCustom Panel Dimensions Tools and PartsOption 2 With Hinge-Side Spacer Option 1 Without Hinge-Side SpacerFront of Panel Top of PanelLocation Requirements Unpack the Ice MakerWater Supply Requirements Electrical RequirementsLeveling Recommended grounding methodConnect Water Supply Connecting the Water LineRear View Connecting the Drain Install Custom Overlay PanelDrain Connection Gravity Drain SystemRemove Door Ice Maker DoorHinge pin #8 x ¹⁄₂ Pan-head wood screw Adhesive pads Custom panelNormal Sounds ICE Maker USE Using the ControlsHow Your Ice Maker Works ICE Maker Care CleaningExterior Surfaces Ice Maker SystemInterior Components Vacation and Moving CareTo shut down the ice maker For ice makers with a drain pump installed TroubleshootingIce Maker Operation Your ice maker will not operatePlumbing Problems Assistance or ServiceIce Production Ice QualityThree Year Limited Warranty Parts and Labor JENN-AIRICE Maker WarrantyItems Excluded from Warranty Disclaimer of Representations Outside of WarrantySeguridad DE LA Fábrica DE Hielo Dimensiones del panel hecho La medidaInstrucciones DE Instalación Herramientas y piezasOpción 2 Con el espaciador del lado de la bisagra Opción 1 Sin el espaciador del lado de la bisagraFrente del panel Parte superior del panelRequisitos de ubicación Desempaque la fábrica de hieloRequisitos del suministro de agua Requisitos eléctricosNivelación Método recomendado para la conexión a tierraConexión de la tubería de agua Conexión del suministro de aguaVista Posterior Sistema de desagüe por gravedad Conexión del desagüeSistema de la bomba de desagüe en algunos modelos Conexión del desagüePuerta de la fábrica de hielo Instale el panel de revestimiento Hecho a la medidaSaque la puerta Bisagra inferior Bisagra superiorInvertir las bisagras Volver a colocar la puertaSonidos normales USO DE LA Fábrica DE HieloCómo funciona su fábrica de hielo Proceso de elaboración de hieloUso de los controles Cuidado DE LA Fábrica DE HieloLimpieza Componentes interiores CondensadorUn condensador sucio u obstruido Tapa de la rejilla de corte TornillosPara apagar la fábrica de hielo Cuidado durante las vacaciones y MudanzasTornillo de mariposa Soporte de la pala para el hielo Funcionamiento de la fábrica de hielo Solución DE ProblemasProducción de hielo Ayuda O Servicio Técnico Problemas de plomeríaCalidad del hielo Exclusiones DE LA Garantía Garantía DE LA Fábrica DE Hielo JENN-AIREsta garantía limitada no cubre Exclusión DE Garantías ImplícitasExclusión DE Declaraciones Fuera DE LA Garantía Dimensions du panneau personnalisé Instructions D’INSTALLATIONSécurité DE LA Machine À Glaçons Outillage et piècesOption 2 Avec cale despacement côté charnière Option 1 Sans cale despacement côté charnièreAvant du panneau Partie supérieure du panneauDéballage de la machine à glaçons Exigences demplacementSpécifications électriques Méthode de mise à la terre recommandéeSpécifications de l’alimentation en eau NivellementRaccordement du tuyau d’eau Raccordement à la canalisation d’eauVUE Arrière Vidange par gravité Raccordement au drain de vidangeSystème avec pompe de vidange sur certains modèles Raccordement du drain de vidangePorte de la machine à glaçons Installation du panneau décoratif personnaliséDépose de la porte Axe de la charnièreInversion des charnières Réinstallation de la porteCharnière supérieure Charnière inférieureSons normaux Utilisation DE LA Machine GlaçonsFonctionnement de la machine Glaçons Fabrication de la glaceEntretien DE LA Machine Glaçons Utilisation des commandesNettoyage Composants intérieurs CondenseurUn condenseur sale ou obstrué Bac à eau Vis à ailette du bac à eau Capuchon de vidangeArrêt de la machine à glaçons Précautions à prendre avant les vacances ou un déménagementVis à ailette Support de pelle à glace Production de glaçons DépannageLa machine à glaçons ne fonctionne pas La machine à glaçons semble bruyanteQualité des glaçons Assistance OU ServiceProblèmes de plomberie Garantie Limitée DE Trois ANS Pièces ET MAIN-D’ŒUVRE Garantie DE Machine À Glaçons JENN-AIRÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pas2011 All rights reserved W10282143B

W10282143B specifications

The Jenn-Air W10282143B is a high-performance appliance that exemplifies the brand's commitment to innovation and quality in kitchen technology. Designed to cater to the needs of modern culinary enthusiasts, this model integrates advanced features and functionalities that simplify meal preparation while enhancing cooking experiences.

One of the standout features of the Jenn-Air W10282143B is its high-efficiency cooling system. This system ensures that food items are stored at optimal temperatures, preserving freshness for an extended period. The unit is also equipped with adjustable shelving, allowing users to customize the interior layout to accommodate various food items, from large platters to delicate produce. This versatility is a significant advantage for households with diverse storage needs.

Technologically, the Jenn-Air W10282143B incorporates smart connectivity features. Through Wi-Fi integration, users can control the appliance remotely via a dedicated app. This means you can adjust settings, receive alerts, and even monitor energy usage from your smartphone. This level of control and convenience is ideal for busy individuals and families who are always on the go.

Another key characteristic of the Jenn-Air W10282143B is its sleek and modern design. The appliance features a stainless-steel exterior that not only enhances its aesthetic appeal but also provides superior durability and easy maintenance. Fingerprint-resistant finishes prevent smudges and keep the surface looking clean and polished, contributing to a tidy kitchen environment.

In terms of energy efficiency, the Jenn-Air W10282143B meets stringent industry standards. It is designed to consume less electricity compared to traditional models, making it an environmentally friendly choice that helps to reduce utility bills without compromising performance.

Safety features are paramount in this design. The model includes automatic shut-off capabilities and safety locks, providing peace of mind for households with children or pets. Furthermore, the intuitive control panel is user-friendly, allowing everyone in the household to operate the appliance with ease.

Overall, the Jenn-Air W10282143B is a perfect blend of style, functionality, and smart technology. With its user-centric design and commitment to performance, it stands out as a reliable kitchen companion for anyone looking to enhance their culinary journey. The combination of innovative features and an elegant aesthetic makes this model a valuable addition to any modern kitchen.
Top Page Image Contents