PROGRAMMING THE BREWER (cont.)
REVIEW RECIPES/MODIFY RECIPES/SET UP NO NAME COFFEE FAVORS:
This function has three parts. It allows the operator to view the brew settings for the various coffee names programmed into the brewer.
It also allows the operator to modify (change) any of the BREW VOLUMES, BYPASS PERCENTAGES, PULSE BREW TIMES, and
Finally, this function is used to set up the NO NAME coffee BREW VOLUMES, BYPASS PERCENTAGES, PULSE BREW TIMES, and
Procedure for reviewing recipes:
1.Press and hold upper right hidden switch (®) until the display reads UNITS. Release the switch, then press and release switch until the display reads
REVIEW RECIPES.
2.Press YES to proceed. The display should now read:
NO NAME, along with MODIFY, SHOW and NEXT (SINGLE brewers)
3.Press and release SHOW. The screen will scroll through all the brew settings for that particular coffee name. When finished, the display will return to the coffee name just viewed.
4.To see settings again, press SHOW. To advance to the next coffee name, press NEXT.
5.To exit, press NEXT until the display reads THAT
WAS THE LAST RECIPE.
6.After 5 seconds, the display will return to the REVIEW RECIPES screen. Press and release NO to advance to the next function screen, or press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit the programming mode and return to the MAIN
SCREEN.
REVIEW RECIPES? | |||
NO |
| YES | |
EXIT TO |
|
| |
NEXT FUNCTION | SINGLE | DUAL | |
SCREEN | |||
BREWERS | BREWERS | ||
| |||
| |||
MODIFY SHOW NEXT |
| MODIFY SHOW NEXT | |
SCROLLS THROUGH ALL |
| SCROLLS THROUGH ALL | |
BREW SETTINGS FOR |
| BREW SETTINGS FOR | |
| |||
|
| COFFEE NAME | |
ADVANCES TO ALL OTHER
COFFEE NAMES PROGRAMMED
IN THE BREWER"S MEMORY
(COFFEE NAME)
MODIFY SHOW NEXT
SCROLLS THROUGH ALL
BREW SETTINGS FOR
ANY OTHER NAMES STORED
IN BREWER'S MEMORY
WHEN THE LAST COFFEE
NAME IN BREWER'S MEMORY
IS DISPLAYED, PRESSING NEXT WILL EXIT AND THE DISPLAY WILL THEN READ:
THAT WAS THE
LAST RECIPE
Page 17 | 41341 080108 |
|