Bunn SNG0033000 manual Programming Switches

Page 5

PROGRAMMING

Using the menu-driven display on the front of the brewer, the operator has the ability to alter or modify various brewing parameters such as brew temperatures, brew volumes, bypass percentages, etc. This allows for the precise brewing of various flavors of coffee.

Programming of the brewer is achieved by entering a certain function. Then, by the use of hidden programming switches, the operator can customize the brewing process to their specifications.

PROGRAMMING SWITCHES

To access the programming mode, and to scroll through the different function screens, hidden programming switches are used. There are five of these switches that will be used for the setup of the brewer.

	SINGLE BREWERS	DUAL BREWERS
	1	2
	1
	2	READY TO BREW	1
	READY TO BREW		1
	READY TO BREW
	WATER TEMP: 200°	WATER TEMP: 200°

P2450

P2289

3

4

5

3

4

5

1.® symbol (upper right of the BUNN logo)

This is used to access the programming mode and is also used to scroll forward through the function list.

2.Upper left corner of the "B" in the BUNN logo

This is used to scroll backwards through the function list.

3."Digital" (lower left under the display)

This is used to select options that appear on the display during programming.

4."Brewer" (center under the display)

This is used to select options that appear on the display during programming.

5."Control" (lower right under the display)

This is used to select options that appear on the display during programming.

Page 5	41341 080108

Image 5

Contents Dual SH DBC BUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Programming SwitchesScreen Programming Lockout Switch mounted on main control boardOutputs Main ScreenNot using a Smart Funnel and/or a G9-2T DBC or MHG Grinder Using a Smart Funnel and a G9-2T DBC or MHG GrinderRecipe Programing Methods RecipesContinue to LevelProgram Flow Diagram Program Flow Diagram Procedure for modifying units of measure Units Setting Units of MeasureNEW Recipe ? Enable EnergysavrSET NEW Recipe Procedure for Setting the RecipeSizes DONE? SET NEW RecipeSET NEW Recipes Procedure to program the coffee nameReview RECIPES? No YES Procedure for reviewing recipes Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee FavorsReview Recipes WAS the Last RecipeBatches DONE? No YES Brew OZ Setting or Adjusting Brew VOL- UmesBypass Modifying pulse brew SET Pulse BrewSET Pulse Brew SET Pulse Brew Easy Pulse Setup DONE? SET Pulse Brew Enter TimesTIMES? Batches DONE? SET PreinfusionDrip Time now displayed on non funnel lock units as well Procedure to modify drip timesSetup Complete Reads Copy Settings Procedure to copy settingsAssign Recipes OnlyYOU SURE? Enable ADS?Are YOU SURE? SET TempSET Temp Procedure to set ready temperatureSET Ready Refill Range 20 toSpray OZ/M Dual Brewers Procedure to adjust the flow rate settingSpray OZ/M Single Brewers Bypass OZ/M Dual Brewers Bypass OZ/M Single BrewersCalibrate Flow ? Procedures to calibrate the sprayhead flow rateCalibrate Flow Brate Bypass .. Press Brew to Start Procedures to calibrate the bypass flow rateBrew Counters Procedures to view/reset the brew countersServer not in Place Server DetectFunnel Detect Service Tools Programming the Brewer SERVERS? Nothing PressedTest FREQUENCY? Factory DefaultsProcedure to set factory defaults