Additional functions
Start time / Finish time
You can delay the start time. Delay start cannot be used for running the descaling program.
Use "Start at" to enter the time of day at which you want the program to start. Use "Ready at" to enter the time of day at which you want the program to end.
The difference between the start time and ready time is the entered cooking time plus the preheating time calculated by the steam oven.
If the temperature in the oven is too high, e.g. just after a cooking program, you will not be able to use this function. "Start at" / "Ready at" will not appear in the display if this is the case.
Open the oven door until the appliance has cooled down.
Cooking results can be impaired if there is a long delay between the food being placed in the oven and the start of cooking.
Setting the times
Select the program, temperature and cooking time as usual.
Select "Change".
Then select "Start at" or "Ready at" and enter the time you want the cooking program to begin or end.
Confirm with "OK".
Deleting a set time
Select "Change".
Select "Start at" or "Ready at".
Select "Reset".
28