About the ice and water dispenser | GE 49-60111, 162D9625P005

SafetyInstructions

About the ice and water dispenser.

On some models

Operating Instructions

Dispenser Pad

Spill Shelf

To Use the Dispenser

Select CUBES, CRUSHED ICE or WATER.

Press the rim of the glass gently against the dispenser pad.

If no water is dispensed when the refrigerator is first installed, there may be air in the water line system. Press the dispenser pad for at least 2 minutes to remove trapped air from the water line and to fill the system with water. To flush out impurities in the water line, throw away the first six glassfuls of water.

The spill shelf is not self-draining.

To reduce water spotting, the shelf and its grille should be cleaned regularly.

A light switch turns the night light in the dispenser on or off. The light also comes on when the dispenser pad is pressed. The light in the dispenser should be replaced with a 7-watt maximum bulb when it burns out.

CAUTION: Never put fingers or any other objects into the ice crusher discharge opening.

InstallationInstructions

Dispenser Ice Storage Bin

To remove:

Rotate

Lift the handle to free the bin from the shelf and pull the bin straight out while supporting it at front and rear.

To replace:

Drive

Slide the bin back until it clicks into place. Mechanism If the bin does not go all the way back,

remove it and rotate the drive mechanism 1/4 turn. Then push the bin back again.

Important Facts About Your Dispenser

Consumer Support TroubleshootingTips

■Add ice before filling the glass with a beverage. This will prevent splashing.

■Do not add ice from trays or bags to the storage bin. It may not crush or dispense well.

■Avoid overfilling a glass with ice or using narrow or extra-tall glasses. Backed-up ice can jam the chute or cause the door in the chute to freeze shut. If ice is blocking the chute, poke it through with a wooden spoon.

■Beverages and foods should not be quick-chilled in the ice storage bin. Cans, bottles or food packages in the storage bin may cause the dispenser to jam.

■Some crushed ice may be dispensed even though you selected CUBES. This happens occasionally when a few cubes accidentally get directed to the crusher.

■After crushed ice is dispensed, some water may drip from the chute.

■Sometimes a mound of snow will form on the door in the ice chute. This condition is normal and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.

■Dispensed water is not ice cold. For colder water, simply add crushed ice or cubes before dispensing water.

162D9625P005, 49-60111 specifications

The GE 49-60111, also known as 162D9625P005, is a highly regarded component within the realm of gas turbine engines, specifically engineered for applications in industrial and aerospace sectors. This product exemplifies General Electric's commitment to advancing power generation technologies with outstanding performance, efficiency, and reliability.

One of the main features of the GE 49-60111 is its robust construction, designed to withstand high temperatures and pressures often encountered in gas turbine operations. The component plays a crucial role in enhancing the overall thermal efficiency of the engine, which is a critical factor in fuel consumption and environmental impact.

The technology behind the GE 49-60111 integrates advanced materials and manufacturing techniques. This includes the use of high-performance alloys that provide enhanced durability while minimizing weight. The component is designed to maintain structural integrity under extreme operational conditions, which is vital for sustaining the engine's longevity and ensuring safety.

Another notable characteristic of the GE 49-60111 is its aerodynamic design. The component features optimized geometries that facilitate improved airflow, contributing to higher combustion efficiency. This design not only boosts performance but also contributes to lower emissions, aligning with modern regulatory requirements and environmental standards.

In terms of maintenance, the GE 49-60111 is engineered for ease of serviceability. Its design allows for straightforward inspection and replacement, minimizing downtime and maintenance costs for operators. This focus on maintenance efficiency is particularly valuable in industrial settings where operational reliability is paramount.

The GE 49-60111 also epitomizes the integration of digital technologies in modern gas turbine systems. Advanced sensors and monitoring systems are often incorporated to provide real-time data on component performance. This data-driven approach allows operators to predict maintenance needs, optimize performance, and extend the lifecycle of the turbine.

Overall, the GE 49-60111, 162D9625P005, stands as a testament to General Electric's innovation in gas turbine technology. With its combination of durability, efficiency, aerodynamic design, and advanced maintenance features, it serves as a critical component in the pursuit of enhanced power generation capabilities while navigating the challenges of modern energy demands.