Installation Instructions
DOOR ALIGNMENT
After leveling, make sure that doors are even at the top.
To make the doors even, adjust the refrigerator door.
Using a 5/16″ socket wrench, turn the door adjusting screw to the right to raise the door, to the left to lower it. (A nylon plug, embedded in the threads of the pin, prevents the pin from turning unless a wrench is used.)
After one or two turns of the wrench, open and close the fresh food door and check the alignment at the top of the doors.
To remove the base grille, open the doors and then pull the grille straight out.
5/16″ Socket
Wrench
Raise |
15