
Temperature Controls
Touch Temperature Controls
(select models, style varies by model)
The controls are located at the top front of the refrigerator compartment.
Control
Adjusting the Controls
•24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If so, adjust the control(s) as indicated in the Temperature Control Guide table below. See page 21 for instructions on checking compartment temperature.
•Except when starting the refrigerator, do not change either control more than one number at a time.
•Allow 24 hours for temperatures to stabilize.
Initial Control Settings
After plugging the refrigerator in, set the controls.
•Pressing the or
pads adjusts the controls to the desired setting.
•Set the freezer control on 4.
•Set the refrigerator control on 4.
•Let the refrigerator run at least 8 to 12 hours before adding food.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occurrence that helps prevent moisture from condensing on the cabinet. This condition will be more noticeable when you first start the refrigerator, during hot weather and after excessive or lengthy door openings.
Temperature Control Guide
Refrigerator too warm Set the refrigerator control to next higher number by
pressing thepad.
Refrigerator too cold Set the refrigerator control to next lower number by
pressing thepad.
Freezer too warm | Set the freezer control to | |
| next higher number by | |
| pressing the | pad. |
|
| |
Freezer too cold | Set the freezer control to | |
| next lower number by | |
| pressing the | pad. |
|
| |
Turn refrigerator OFF | Press the freezer or | |
| refrigerator | pad until a |
| dash | |
| display. |
|
9