Up to 30 tracks can be programmed from any of the inserted discs.
.,
U
Use the remote control.
1 Press PRGM while pressing SHIFT in stop mode.
2 Press one of DISC DIRECT PLAY 1-5 to select a disc.
To select disc 4 or 5, press DISC DIRECT PLAY 4 or 5 while pressing SHIFT.
Go to the next step when the tray stops rotating.
3Press numbered buttons O-9 and +1 O to program a track.
Example:
To select the 25th track, press +1O, +1O and 5. To select the 10th track, press +1O and O.
Selected track number | Total number of selected tracks |
Program number | 1 |
Total playing time of the | |
| selected tracks |
4Repeat steps 2 and 3 to program other tracks.
5Press
To check the program
Each time + or - is pressed in stop mode, a disc number, track number, and program number will be displayed.
To clear the program
Press ■ CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT repeatedly while pressing SHIFT until CL appears on the display.
●During programmed play, you can not use random play, check the remaining time or select a track.
●“FULL”is displayed if you attempt to program more than 30 tracks.
14ENGLISH