OTHER CONNECTIONS
ECD DIGITAL OUT
(OPTICAL)
Iaaiaa
&
& VIDEO/AUX
IN
@@
6)Sml
Refer to the operating instructions of the connected equipment
for details.-
“The connecting cords are not supplied. Obtain the necessary connecting cords.
●Consult your local Aiwa dealer for optional equipment.
Vli3E0/AllIX IN JACKS
This unit can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio equipment (LD players, MD players, VCRs, TV, etc.).
Connect the red plug to VIDEO/AUX IN R jack, and the white plug to V!DEO/AUX IN L jack.
CDI ~[G[TAL | OUT | (OPTICAL) | JACK |
This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment (DAT deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL) jack. Then, connect an optical cable plug to the CD DIGITAL OUT (OPTICAL) jack.
(’a
w
When the CD DIGITAL OUT (OPTICAL) jack is not being usedl
Attach the supplied dust cap.
w z
To Iplay equipment connected to VIDEO/AUX IN jacks proceed & as follows.
7 lPress VIDEO/AUX.
“VIDEO” appears on the display.
2 lPlay the connected equipment.
To change a source name on the display
When VIDEO/AUX is pressed, “VIDEO”is displayed initially. It canl be changed to “AUX”or ‘(TV.
With the power on, press POWER while pressing VIDEO/AUX. Repeat the procedure to select one of the names.
❑
ENGLISH 21