Cannon 10548G MK2, 10545G MK2, 10540G MK2 installation instructions Timer Operation, Clockface

Page 7

TIMER OPERATION

CLOCKFACE

The timer incorporates a 24 hour clock.

Ensure the correct time of day is always set, before using you cooker.

SYMBOLS

Will light up when you select a Minute Minder Period and will remain lit for the period set.

This “Cookpot” symbol will light up either:– _ When the cooker is in "Manual Mode"

When you press the Cook Period Button and set a length of time for an

Auto Cooking Programme. ( symbol will light up during Auto Cooking)

"A" will light up:–

When the timer is first turned on it will flash. (It will go out when a time of day is set.

When an Auto Cooking Programme has been set.

The Auto symbol "A" will flash at the end of an Auto Cooking programme to indicate that the programme has finished.

(When the "A " symbol is flashing, to return the oven to Manual operation, turn the oven controls off, ensure that the correct time of day is set, and press the "Cook Period & End Time" buttons together– The "A" symbol will go out.)

TIMER FUNCTION BUTTONS

Minute Minder Button Here you can set a time period of up to 23 hours 59 minutes, that will count down. When it reaches zero, the timer will emit an audible tone.

For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.

AUTO COOKING PROGRAMME

Cook Period Button Cook Period is the actual length of time for which, the timer will switch the oven(s) on as part of an "Auto Cooking" programme.

(e.g. If you set 2 hours, the food will be cooked for 2 hours).

End Time Button The time of day at which you want an “Auto Cooking” programme to end.

For Example: If you set a "Cook Period" for 2 hours, and "End Time" of 11:00. The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme has finished.

Notes:

When setting an Auto Cooking programme you will need to set the oven controls(s) to the required temperature(s) when you set the timer.

If an Auto Cooking programme has been set the oven(s) will only operate during the pre-programmed time.

"+" and "–" Buttons Used to adjust the various timer function settings.

Used to adjust pitch of audible tone (see other notes on timer operation).

7

Image 7
Contents Chester Contents Introduction For Your Safety Leave Unattended While Cooking Automatic Cooking Automatic CookingGuidance on Automatic Cooking Clockface Timer OperationSetting the Time of DAY Timer Operation Step Step Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingTOP Oven Guidance on Using the TOP OvenTo USE the TOP Oven Meat and Poultry TOP Oven Cooking ChartYeast Mixtures Relighting the Burner GrillGrill PAN and Handle To USE the GrillShelf Position Food To USE the Main Oven Main Oven‘COOK CHILL’ Dishes Cold Start CookingRoasting of Large Poultry Storage and RE-HEATING of FoodMain Oven Cooking Chart CAKES, Pastries and Biscuits Using the ‘SLOW COOK’ Setting for Slow Cooking ‘SLOW COOK’ SettingOven Doors Care and CleaningMain Oven Heat Clean Linings Replacement of Oven Light BulbVitreous Enamel Cooker Finish Cleaning MethodSomething Wrong With Your Cooker Problem CheckSomething Wrong Provision for Ventilation Installation InstructionsGAS Safety Installation & USE Regulations LocationGeneral Technical Data DimensionsCooker Hoods Space for FixingLevelling Unpacking the CookerStability Bracket Connecting to GAS Supply Connect to a 230-240V A.C. Supply only Electrical ConnectionInstallation and Operational Checks Key Contacts