Cannon 10545G MK2, 10548G MK2, 10540G MK2 installation instructions Connecting to GAS Supply

Page 33

INSTALLATION INSTRUCTIONS

CONNECTING TO GAS SUPPLY

The cooker is designed to match the depth of standard 600mm worktops. An adaptor backplate should, therefore, be fitted within the shaded area shown to allow the cooker to be pushed fully to the wall. If a forward facing backplate is used, it must be chased into the wall.

140
220
450
210	320
200
540

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

The temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do not exceed 70oC.

33

Image 33

Contents Chester Contents Introduction For Your Safety Leave Unattended While Cooking Automatic Cooking Automatic CookingGuidance on Automatic Cooking Clockface Timer OperationSetting the Time of DAY Timer Operation Step Step Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingGuidance on Using the TOP Oven TOP OvenTo USE the TOP Oven Meat and Poultry TOP Oven Cooking ChartYeast Mixtures Grill PAN and Handle GrillTo USE the Grill Relighting the BurnerShelf Position Food To USE the Main Oven Main OvenRoasting of Large Poultry Cold Start CookingStorage and RE-HEATING of Food ‘COOK CHILL’ DishesMain Oven Cooking Chart CAKES, Pastries and Biscuits Using the ‘SLOW COOK’ Setting for Slow Cooking ‘SLOW COOK’ SettingMain Oven Heat Clean Linings Care and CleaningReplacement of Oven Light Bulb Oven DoorsVitreous Enamel Cooker Finish Cleaning MethodSomething Wrong With Your Cooker Problem CheckSomething Wrong GAS Safety Installation & USE Regulations Installation InstructionsLocation Provision for VentilationGeneral Technical Data DimensionsCooker Hoods Space for FixingUnpacking the Cooker LevellingStability Bracket Connecting to GAS Supply Connect to a 230-240V A.C. Supply only Electrical ConnectionInstallation and Operational Checks Key Contacts