Pitco Frialator L22-355 service manual Minimum on and OFF Cycle Time, Recovery Times

Page 14

Spin Fryer I12 Cooking Computer

Pitco P/N 60149505

4.3Minimum ON and OFF Cycle Time

With display showing

press product key 3.

Display shows [MIN ON:nn] [MIN ON], where “nn” is the value, in seconds, of time for minimum heat pulse period.

To change this value, use the product keys for numeric entry of a new value, then

press the key to save.

Display shows [MIN OFF:nn] [MIN OFF], where “nn” is the value, in seconds, of time for minimum heat off period. Use the product keys for numeric entry of a new value.

 Press the

key. Display now shows

.

4.4Recovery Times:

This controller maintains a record of heat up times for the appliance. A poorly running appliance will have increased recovery times stored in this display. There is no selection done here, just the display of recovery time values.

With display showing , press the product key [0].

 Display will show

.

Press product key 6; display will show [RECOVERY] [TEST].

Press the product key [0]. Display will show [FnnnLyyy], where nnn is the factory recovery value, and yyy is the last warm- up recovery value.

 After recording these values, press the key. Display will again return to

.

3

4

L22-355 Rev 1

Page 14 of 28

Image 14

Contents For Pitco P/N 60149505 Spin Fryer Important Information for Future ReferenceTo Enter Programming Level 1 for the Store Manager Spin Fryer I12 Cooking Computer To start a cook To turn the appliance onTo turn the appliance OFF To cancel a cook To check Actual and Set temperaturesManual Boil Entry To perform a Boil Out operationAutomatic Boil Entry Water Detection To Set Cook Temperature To Enter Programming Level 1 for the Store ManagerHold Time Cook TimeShake Time Spin Rate Hold Pre-AlarmSpin Time To Exit Level 1 programmingFahrenheit or Celsius Display Password Change or Required?To Change Options Level 2 for the Store Manager Melt Cycle Type Beeper ON/OFFLanguage Selection Recovery Test Value Melt Cycle on Time Offset the Temperature DisplayTo Enter Programming Level 3 for the Technician Recovery Times Minimum on and OFF Cycle TimeDiagnostic Menu Entry Function Description ButtonReady Level Temperature Operating RangeMore Service Menu Entry Instant On ToggleCancel Duration Shake Alarm DurationHold Alarm Duration Configuration ValueSet Network Address Factory ResetStanding Pilot Toggle To Exit Programming LevelPitco Collect toggle Offset Temperature DisplayFactory Menu Level 4 for the Technician High Limit Value Recovery Test ValuesOperating Temperature Range Spin Diagnostics Used if object becomes stuck during spinning12.1 Control ID Display Test On/OffMore Factory Menu Entry To Exit Factory Menu LevelOther Displays System / FailurePage Mechanical Dimensions Electrical Connections at Left and Right connectors J1Left Inputs Type NominalOhms Probe Resistance ChartProbe Resistance in 5F Increments Probe ResistanceMailing Address P.O. BOX 501, CONCORD, NH