Pitco Frialator L22-355 Factory Menu Level 4 for the Technician, Pitco Collect toggle

Page 19

Spin Fryer I12 Cooking Computer

Pitco 60149505

5Factory Menu Level 4 (for the Technician)

With no cook timers running, displays will show one of the following displays:

;

, or

.

Press the key. The left display will show . The right display will be blank.

	Enter password	using the product keys as a numeric keypad for entry.
	Display will show	. Product key indicators will illuminate

to prompt operator to select a key. This section details parameters that may be changed in Level 4 programming.

5.1Pitco Collect (toggle)

With display showing	press product key L.
 Display shows [PCOLLECT] [OFF	]. This toggle forces the RS-485 link to

output data collection parameters during test, and calibration. This has no meaningful use in the field.

Note: Do not change this setting. Factory shipped default is OFF.

To change this value, use the 0 key to select a new value.

 Press the

key. Display returns to

.

5.2Offset Temperature Display

This menu is identical to Offset Temperature Display section 4.5

except

is displayed instead of [SERVICE].

L

1

5.3Melt Cycle ON Time

This menu is identical to Melt Cycle ON Time section 4.1except displayed instead of [SERVICE].

5.4Minimum ON and OFF Cycle Time

This menu is identical to Minimum ON and OFF Cycle Time section 4.2 except is displayed instead of [SERVICE].

is

2

3

Page 19 of 28

L22-355 Rev 1

Image 19

Contents Important Information for Future Reference For Pitco P/N 60149505 Spin FryerTo Enter Programming Level 1 for the Store Manager Spin Fryer I12 Cooking Computer To turn the appliance OFF To turn the appliance onTo start a cook To check Actual and Set temperatures To cancel a cookAutomatic Boil Entry Water Detection To perform a Boil Out operationManual Boil Entry To Enter Programming Level 1 for the Store Manager To Set Cook TemperatureShake Time Cook TimeHold Time To Exit Level 1 programming Hold Pre-AlarmSpin Time Spin RateTo Change Options Level 2 for the Store Manager Password Change or Required?Fahrenheit or Celsius Display Language Selection Beeper ON/OFFMelt Cycle Type Recovery Test Value To Enter Programming Level 3 for the Technician Offset the Temperature DisplayMelt Cycle on Time Minimum on and OFF Cycle Time Recovery TimesFunction Description Button Diagnostic Menu EntryInstant On Toggle Temperature Operating RangeMore Service Menu Entry Ready LevelConfiguration Value Shake Alarm DurationHold Alarm Duration Cancel DurationTo Exit Programming Level Factory ResetStanding Pilot Toggle Set Network AddressFactory Menu Level 4 for the Technician Offset Temperature DisplayPitco Collect toggle Operating Temperature Range Recovery Test ValuesHigh Limit Value Used if object becomes stuck during spinning Spin DiagnosticsTo Exit Factory Menu Level Test On/OffMore Factory Menu Entry 12.1 Control ID DisplaySystem / Failure Other DisplaysPage Mechanical Dimensions J1Left Inputs Type Nominal Electrical Connections at Left and Right connectorsProbe Resistance Probe Resistance ChartProbe Resistance in 5F Increments OhmsMailing Address P.O. BOX 501, CONCORD, NH