Pitco Frialator L22-355 Ready Level, Temperature Operating Range, More Service Menu Entry

Page 16

Spin Fryer I12 Cooking Computer

Pitco P/N 60149505

4.6Ready Level

With display showing

press product key 6.

Display shows [READY nn], where “nn” is the value, in degrees below set temperature

that the

message is displayed.

To change this value, use the product keys for numeric entry of a new value.

Press the

key. Display now shows

.

6

4.7Temperature Operating Range

Forces the control to display the range of temperatures that may be set by operators.

With display showing

press product key 7.

Display shows [RANGE 1] [200 380]. No adjustments are permitted here. This is an information display only.

Press the

key. Display returns to

.

4.8More Service Menu Entry

With display showing

press product key 8 to enter submenu. Display now

shows

.

7

8

Product keys will illuminate where adjustments are permitted; all other keys are inactive. The following

section details each product key function in the

menu.

4.8.1Instant On Toggle

This setting is to allow disabling the instant on feature. This feature applies a momentary heat pulse to the appliance when a cook key is pressed. Factory default value is ON.

With display showing

, press product key L.

Display will show [INST ON [xxx

], where “xxx” is ON or OFF.

Use product key [0] change value. Press the to save choice.

L

Display returns to

.

L22-355 Rev 1

Page 16 of 28

Image 16
Contents For Pitco P/N 60149505 Spin Fryer Important Information for Future ReferenceTo Enter Programming Level 1 for the Store Manager Spin Fryer I12 Cooking Computer To turn the appliance OFF To turn the appliance onTo start a cook To cancel a cook To check Actual and Set temperaturesAutomatic Boil Entry Water Detection To perform a Boil Out operationManual Boil Entry To Set Cook Temperature To Enter Programming Level 1 for the Store ManagerShake Time Cook TimeHold Time Hold Pre-Alarm Spin TimeSpin Rate To Exit Level 1 programmingTo Change Options Level 2 for the Store Manager Password Change or Required?Fahrenheit or Celsius Display Language Selection Beeper ON/OFFMelt Cycle Type Recovery Test Value To Enter Programming Level 3 for the Technician Offset the Temperature DisplayMelt Cycle on Time Recovery Times Minimum on and OFF Cycle TimeDiagnostic Menu Entry Function Description ButtonTemperature Operating Range More Service Menu EntryReady Level Instant On ToggleShake Alarm Duration Hold Alarm DurationCancel Duration Configuration ValueFactory Reset Standing Pilot ToggleSet Network Address To Exit Programming LevelFactory Menu Level 4 for the Technician Offset Temperature DisplayPitco Collect toggle Operating Temperature Range Recovery Test ValuesHigh Limit Value Spin Diagnostics Used if object becomes stuck during spinningTest On/Off More Factory Menu Entry12.1 Control ID Display To Exit Factory Menu LevelOther Displays System / FailurePage Mechanical Dimensions Electrical Connections at Left and Right connectors J1Left Inputs Type NominalProbe Resistance Chart Probe Resistance in 5F IncrementsOhms Probe ResistanceMailing Address P.O. BOX 501, CONCORD, NH