Pitco Frialator L22-355 service manual Test On/Off, More Factory Menu Entry, Control ID Display

Page 22

Spin Fryer I12 Cooking Computer

Pitco P/N 60149505

5.11Test On/Off

With display showing	press product key 0.	0
Display shows [TEST xx], where “xx” is ON or OFF. If ON is selected, temperatures
displayed by the controller are probe tip temperatures unaltered by values set in
section 4.1, or 5.1. For normal operations, this setting should remain OFF.

To change this value, use product key 0 to toggle choice (ON or OFF).

Press the

key. Display now shows

.

5.12More Factory Menu Entry

With display showing		press product key R.	R
Display shows		.
5.12.1	Control ID Display
	From the	display, press the [0] key.
	Display will show [CONTROL ] [60149505], the Pitco part number, 60149505.
	Press the [0] key again.
	Display will show [S/W	] [0149501x], this is Pitco’s software number and current
	revision letter.

Press the [0] key again.

Display will show [CHECKSUM] [00Fxxxxx], the software check sum of the loaded software.

 Press the [0] key again to repeat these items, or, press to return to

.

5.12.2 Set Network Address

This menu is identical to Set Network Address section 4.8.9 except

is

displayed instead of [SERVICE].

0

R

5.13To Exit Factory Menu (Level 4):

To exit Factory Programming, Press the key. Display will show . Continue with settings in section 2 or 3, or exit in the next step.

To return to normal operations, press the key again.

 Display shows

;

, or

.

L22-355 Rev 1

Page 22 of 28

Image 22

Contents For Pitco P/N 60149505 Spin Fryer Important Information for Future ReferenceTo Enter Programming Level 1 for the Store Manager Spin Fryer I12 Cooking Computer To turn the appliance OFF To turn the appliance onTo start a cook To cancel a cook To check Actual and Set temperaturesAutomatic Boil Entry Water Detection To perform a Boil Out operationManual Boil Entry To Set Cook Temperature To Enter Programming Level 1 for the Store ManagerShake Time Cook TimeHold Time Spin Rate Hold Pre-AlarmSpin Time To Exit Level 1 programmingTo Change Options Level 2 for the Store Manager Password Change or Required?Fahrenheit or Celsius Display Language Selection Beeper ON/OFFMelt Cycle Type Recovery Test Value To Enter Programming Level 3 for the Technician Offset the Temperature DisplayMelt Cycle on Time Recovery Times Minimum on and OFF Cycle TimeDiagnostic Menu Entry Function Description ButtonReady Level Temperature Operating RangeMore Service Menu Entry Instant On ToggleCancel Duration Shake Alarm DurationHold Alarm Duration Configuration ValueSet Network Address Factory ResetStanding Pilot Toggle To Exit Programming LevelFactory Menu Level 4 for the Technician Offset Temperature DisplayPitco Collect toggle Operating Temperature Range Recovery Test ValuesHigh Limit Value Spin Diagnostics Used if object becomes stuck during spinning12.1 Control ID Display Test On/OffMore Factory Menu Entry To Exit Factory Menu LevelOther Displays System / FailurePage Mechanical Dimensions Electrical Connections at Left and Right connectors J1Left Inputs Type NominalOhms Probe Resistance ChartProbe Resistance in 5F Increments Probe ResistanceMailing Address P.O. BOX 501, CONCORD, NH