Texas Instruments TMS320C6202 specifications Important Notice

Page 74

IMPORTANT NOTICE

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.

CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (ªCRITICAL APPLICATIONSº). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK.

In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof.

Copyright  1999, Texas Instruments Incorporated

Image 74

Contents Advance Information FIXED-POINT Digital Signal Processor Description Device characteristicsCharacteristics Description CPU Functional block diagramTimers Data Memory Interrupt Selector EmifCPU description Control TimersBit Data C62x CPU RegistersLD1 RSV2 RSV1 RSV0 Signal groups descriptionEMU1 EMU0 RSV4 RSV3 Clock/PLL Ieee Standard 1149.1CE0 CE3 CE2CE1 BE3 Hold BE2XD310 XBE3/XA5 XBE2/XA4 XBE1/XA3 XBE0/XA2 Xrdy Xhold XholdaFIXED-POINT Digital Signal Processor TMS320C6202Signal PIN no TYPE² Description Name GJL GLS Expansion BUS Emif ± Address Signal PIN no TYPE² Description Name GJL GLS Emif ± Address Emif ± DataMultichannel Buffered Serial Port 0 McBSP0 TimersEmif ± BUS Arbitration Multichannel Buffered Serial Port 1 McBSP1Reserved for Test Signal PIN no TYPE² Description Name GJL GLSMultichannel Buffered Serial Port 2 McBSP2 AE8 AD6AE7 CvddAC4 AB4AC3 AC5 CvddGND Ground PinsVSS Signal PIN no TYPE² Description Name GJL GLS Ground Pins AF10 Scsi TMDS00510WS Development supportDevelopment Tool Platform Part Number TMS Device Family Temperature Range Default 0 C to 90 CPrefix Device Speed Range Package Type ²Documentation support Advance Information Power-supply sequencing Clock PLLParameter Test Conditions MIN TYP MAX Unit Recommended operating conditionsMIN NOM MAX Unit IOL Signal transition levelsParameter Measurement Information IOHTiming requirements for Xclkin ²³ see Figure Input and Output ClocksTiming requirements for CLKIN² see Figure Clkmode Unit MIN MAXParameter Switching characteristics for CLKOUT1²³ see FigureSwitching characteristics for CLKOUT2 ³ see Figure Clkmode =Switching characteristics for XFCLK²³ see Figure Xfclk TimingsAsynchronous Memory Timing AWEAOE Are AWE Ardy Setup = Strobe = Not ready = Hold =CEx BE30 EA212 ED310 SYNCHRONOUS-BURST Memory Timing Unit MIN MAXEA212 ED310 CEx BE30BE1 BE2 BE3 BE4 SDCAS/SSADS² SDRAS/SSOE² SDWE/SSWE²Synchronous Dram Timing Timing requirements for synchronous Dram cycles see FigureCA1 CA2 CA3 Read CLKOUT2BE1 BE2 BE3 SDA10 SDRAS/SSOE ² SDCAS/SSADS² SDWE/SSWE²Dcab ActvSDRAS/SSOE² SDCAS/SSADS² SDWE/SSWE² SDA10 SDRAS/SSOE² SDCAS/SSADS² SDWE/SSWE²SDA10 SDRAS/SSOE ² SDCAS/SSADS ² SDWE/SSWE ² Refr CLKOUT2MRS Hold Holda HOLD/HOLDA TimingTiming requirements for HOLD/HOLDA cycles ² see Figure Emif Bus² DSP Owns BusSwitching characteristics during reset¶ see Figure Reset TimingTiming requirements for reset see Figure Reset CLKOUT1FIXED-POINT Digital Signal Processor INUMx External Interrupt TimingEXTINTx, NMI Intr Flag Parameter MIN MAX Unit Expansion BUS Synchronous Fifo TimingMIN MAX Unit XA1 XA2 XA3 XA4 XOE XRE XWE/XWAIT §XA2 XA3XA4 XA1XOE XRE XWE/XWAIT³ XA3 XA4 XOE XRE XWE/XWAIT ³Expansion BUS Asynchronous Peripheral Timing XOE XRE XWE/XWAIT ³ XRDY§ XCEx XBE30/XA52 ² XD310XOE XRE XWE/XWAIT ³ Xrdy § Expansion BUS Synchronous Host Port Timing Xblast § Xclkin XCS XAS XcntlXW/R ² XBE30/XA52 ³ XRDY¶XBLAST§ Xclkin XCS XAS Xcntl XW/R²XBE30/XA52³ XBE1 XBE2 XBE3 XBE4TdXCKIH-XASV Delay time, Xclkin high to Valid 15.5 Xrdy XWE/XWAIT ¶ Xclkin XASXblast ³ XBE30/XA52 § Addr XD310 Xrdy Xboff Xhold ¶ Xholda ¶ Xhold # Xholda #XBE30/XA52 ² XR/W ³ XD310 Word Expansion BUS Asynchronous Host Port TimingXCS Xcntl XrdyExternal Device as Asynchronous MasterÐWrite XBE30/XA52² XR/W ³ XD310 WordXBus ² C6202 XHOLD/XHOLDA TimingDSP Owns Bus External Requestor Xhold input Expansion Bus ArbitrationÐInternal Arbiter Disabled Xhold output Xholda input XBus ² C6202Multichannel Buffered Serial Port Timing Timing requirements for McBSP²³ see FigureSwitching characteristics for McBSP²³ see Figure Bitn-1 Clks ClkrFSR int ClkxFSR external CLKR/X no need to resync CLKR/Xneeds resync Timing requirements for FSR when Gsync = 1 see FigureClks Master Slave MIN MAX Master § Slave MIN MAXClkx FSX Bit Bitn-1McBSP Timing as SPI Master or Slave Clkstp = 11b, Clkxp = MASTER§ Slave MIN MAX FIXED-POINT Digital Signal Processor McBSP Timing as SPI Master or Slave Clkstp = 11b, Clkxp = Timing requirements for timer inputs ² see Figure DMAC, TIMER, POWER-DOWN TimingSwitching characteristics for Dmac outputs² see Figure Switching characteristics for timer outputs² see FigureSwitching characteristics for power-down outputs² see Figure TwPDH Pulse duration, PD high 10P Jtag TEST-PORT Timing Switching characteristics for Jtag test port see Figure DTCKL-TDOV Delay time, TCK low to TDO valid Timing requirements for Jtag test port see FigureThermal resistance characteristics S-PBGA package Mechanical Data80 MAX 18,10 16,80 TYP 17,90Heat Slug 4188959/B 12/98Important Notice