Care and cleaning of the range.
ReceptacleSocket
Bulb
Tab
Glass cover
Oven Light Replacement (on some models)
NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip.
CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the oven at the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool completely.
For your safety, do not touch a hot bulb with bare hands or a damp cloth.
To remove:
Turn the glass cover counterclockwise 1/4 turn until the tabs of the glass cover clear the grooves of the socket.
Using gloves or a dry cloth, remove the bulb by pulling it straight out.
To replace:
Use a new
Using gloves or a dry cloth, remove the bulb from its packaging. Do not touch the bulb with bare fingers.
Receptacle
Use gloves or cloth
Push the bulb straight into the receptacle all the way.
Place the tabs of the glass cover into the grooves of the socket. Turn the glass cover clockwise 1/4 turn.
For improved lighting inside the oven, clean the glass cover frequently using a wet cloth. This should be done when the oven is completely cool.
Reconnect electrical power to the oven.
46