![](/images/new-backgrounds/1090090/9009013x1.webp)
PREPARATION
Your range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting. When moving the range on this type of flooring, use care, and it is recommended that these simple and inexpensive instructions be followed.
Installing
The range should be installed on a 1/4 inch thick sheet of plywood (or similar material) as follows:
When the floor covering ends at the front of the range, the area that the range will rest on should be built up with plywood to the same level or higher than the floor covering. This will allow the range to be moved for cleaning or servicing.
Leveling
Leveling screws are located on each corner of the base of the range. Remove the bottom drawer and you can level the range on an uneven floor with the use of
a nutdriver or channel locks.
To remove the drawer, pull the drawer out all the way, tilt up the front and take it out. To replace the drawer, insert glides at back of the drawer beyond stop on the range glides. Lift drawer if necessary to insert easily.
Let the front of drawer down, then push in to close.
One of the rear leveling screws will engage the
and the leveling screw that is to be installed into the
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
7