Jura Capresso Z5 Cappuccino Making cappuccino, Cappuccino rinsing cycle,  Cappuccino  Milk

Page 14

 COFFEE READY



To stop the brewing process prematurely, press any of the product keys.

You can pre-select the strength of your coffee when the ma-

chine is ready to brew ( PLEASE SELECT). To do so, turn the Rotary Switch (B) until the display indicates the desired coffee strength and then press the coffee key of your choice (key F for special coffee).

You can change the amount of water while the machine is brewing coffee. To do so, turn the Rotary Switch (B) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML.

The amounts given in ML are approximate values and may vary from the effective quantity.

9. Cappuccino

9.1 Making cappuccino

 COFFEE READY



Take the milk hose out of the Welcome Pack. (We recommend using the short hose with the vacuum milk container and the long hose with a milk carton). Connect the hose with the suction pipe projecting from the vacuum milk container. Then attach the other end of the hose to the cappuccino nozzle (Fig. 8).

Turn the selector switch (1, Fig. 9) to the milk frothing range (a, Fig. 9).

Place 1 cup under the cappuccino nozzle and press the Cappuc- cino key .

 CAPPUCCINO

 MILK

The machine stops drawing milk automatically as soon as the set amount of milk (in SEC) has been used.

 CAPPUCCINO

 NORMAL (example)

The coffee brewing process stops automatically as soon as the set amount of coffee has been made.

 COFFEE READY



To stop the frothing or the brewing process prematurely, press the Cappuccino key again.

You can pre-select the strength of your coffee when the ma-

chine is ready to brew ( PLEASE SELECT). To do so, turn the Rotary Switch (B) until the display indicates the desired coffee strength and then press the key of your choice (E for cappuccino).

You can change the amount of milk and the amount of water while the machine is brewing coffee. To do so, turn the Rotary Switch (B) until the display indicates the required SEC (during frothing) or ML (during coffee brewing).

The amounts given in ML are approximate values and may vary from the effective quantity.

9.2 Cappuccino rinsing cycle

10 min. after having made cappuccino or frothed milk, a message on the display of your IMPRESSA will prompt you to run a cappuccino rinsing cycle.

 COFFEE READY

14

Image 14
Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Introduction Safety information 1.1 WarningPrecautions Preparing the Impressa Z5 2.1 Check supply voltageFill water tank Adjusting the grinding gearCheck electrical fuse Fill coffee beansFirst use Power switchStainless steel vacuum milk container 16b Adjusting your machine to the water hardness Cup illuminationUsing the Claris plus filter cartridge Installing the filter Unit is Heating  Coffee Ready Changing the filter Filter Rins  Coffee Ready  FILTER-CHANGEMaking special coffee Rinsing the machineMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees  Rinsing  Coffee Ready Cappuccino  Milk Cappuccino Making cappuccinoCappuccino rinsing cycle  CappuccinoCappuccino cleaning cycle Making hot milk Cleaning the cappuccino nozzle Machine is Cleaning  Coffee Ready Making hot waterBrewing coffee using pre-ground coffee powder Switching the Impressa off Rinse Left Spout  Press Button Cappuccino setting Goodbye  Enough ?  Press Button Enough Water  Press Button Milk settingSetting the amount of hot water Programming the filter MaintenanceProgramming  Rinse UnitProgramming the coffee strength Cappuccino programming Programming the milkSave energy Save energy Level Setting the timeSave energy No  Time Unit on Programming the automatic switch-on timeProgramming the automatic switch-off time Unit on Minutes Information Information OFF After  1 EspressoRenaming Changing the units Programming the languageProgramming the display Maintenance Filling the water tank Changing the time formatDrip tray missing Emptying the coffee groundsEmptying the drip tray Grounds container missingAroma preservation cover missing Information about cleaning cycleFilling the bean tank Removing stones from the grinding gearEmptying the system CleaningInformation about decalcify  Tray / Grounds  Empty  Machine is CleaningDecalcifying  ADD Tablet Machine is Decalcifying  Unit is Heating  Solvent in Tank  Press Button Machine is Decalcifying Disposal Tips for perfect coffeeProblems Problem Cause RemedyTechnical data Legal information