Jura Capresso Z5 Check electrical fuse, Fill water tank, Fill coffee beans, Vacuum milk container

Page 8

2.2 Check electrical fuse

The IMPRESSA Z5 is designed for an electric current of 10 amperes. Check if the electrical fuse has sufficient capacity.

2.3 Fill water tank

Only use fresh, cold water. Never fill in milk, mineral water or other liquids.

Remove the water tank and rinse it with cold tap water thoroughly (Fig. 1).

Then fill the water tank and reinstall it. Make sure to install the tank properly, it must engage audibly.

2.4 Fill coffee beans

To ensure that your machine will work perfectly for a long time and to avoid damage, please note that the grinding gear of your JURA coffee machine is not suitable for coffee beans which were treated, during or after roasting, with additives (e.g. sugar). Such coffee blends may damage the grinding gear. Any repair costs resulting from the use of such blends are not covered by warranty.

Open the bean tank cover (7) and remove the aroma preser- vation cover (8).

Remove any dirt or foreign matter from the bean tank.

Fill coffee beans into the bean tank (Fig. 2), replace the aroma preservation cover (8), make sure the rounded edges are pointing outwards, and close the lid.

2.5 Adjusting the grinding gear

You can adjust the grinding gear to the roast of your coffee. We recommend

a fine grinding degree

for bright roasts

a coarse degree

for dark roasts

The grinding degree may only be adjusted while the grinding gear is running.

Open the bean tank cover (7).

To adjust the grinding degree, turn the Rotary Switch (14) to the required position.

There are two options:

the narrower the bar, the finer the grind the broader the bar, the coarser the grind

2.6 Vacuum milk container

The vacuum milk container and the lid are NOT dishwasher safe

Wash out the vacuum milk container (16a/16b) thoroughly before you use it for the first time.

Fill the milk container with cool, fresh milk.

Always make sure there is enough milk in the vacuum milk con- tainer before you froth milk or make cappuccino.

If filled with refrigerated milk, the vacuum milk container will keep mil cool for about 8 hours.

Please do not fill ice cubes into the vacuum milk container since these could damage its coating.

Keep the vacuum milk container away from hot stove tops etc.

The vacuum milk container may be damaged if dropped.

2.6.1 Vacuum milk container (16a)

Never use shapr or pointed objects in the milk container since these could damage its coating.

8

Image 8
Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Safety information 1.1 Warning PrecautionsIntroduction Preparing the Impressa Z5 2.1 Check supply voltageAdjusting the grinding gear Check electrical fuseFill water tank Fill coffee beansFirst use Power switchStainless steel vacuum milk container 16b Adjusting your machine to the water hardness Cup illuminationUsing the Claris plus filter cartridge Installing the filterChanging the filter  Filter Rins Unit is Heating  Coffee Ready  Coffee Ready  FILTER-CHANGERinsing the machine Making coffee Espresso, 2 espressos, 1 coffee, 2 coffeesMaking special coffee  Rinsing  Coffee ReadyCappuccino Making cappuccino Cappuccino rinsing cycle Cappuccino  Milk  CappuccinoCappuccino cleaning cycle Cleaning the cappuccino nozzle  Machine is Cleaning  Coffee ReadyMaking hot milk Making hot waterBrewing coffee using pre-ground coffee powder Switching the Impressa offCappuccino setting  Goodbye Rinse Left Spout  Press Button  Enough ?  Press Button Enough Water  Press Button Milk settingSetting the amount of hot water Maintenance ProgrammingProgramming the filter  Rinse UnitProgramming the coffee strength Cappuccino programming Programming the milkSave energy Setting the time Save energy NoSave energy Level  TimeProgramming the automatic switch-on time Programming the automatic switch-off time Unit on Unit on MinutesInformation  OFF After Information  1 EspressoRenaming Changing the units Programming the languageProgramming the display Maintenance Filling the water tank Changing the time formatEmptying the coffee grounds Emptying the drip trayDrip tray missing Grounds container missingInformation about cleaning cycle Filling the bean tankAroma preservation cover missing Removing stones from the grinding gearEmptying the system CleaningInformation about decalcify  Machine is Cleaning Decalcifying Tray / Grounds  Empty  ADD Tablet Machine is Decalcifying  Unit is Heating  Solvent in Tank  Press Button Machine is Decalcifying Disposal Tips for perfect coffeeProblems Problem Cause RemedyTechnical data Legal information