Jura Capresso Z5 Rinsing the machine, Making coffee Espresso, 2 espressos, 1 coffee, 2 coffees

Page 13

6. Rinsing the machine

If the coffee machine is switched off and has cooled down, you will be prompted to start a rinsing cycle when switching the machine back on. The machine automatically performs a rinsing cycle when you switch it off.

 PRESS MAINTENANCE



Place a cup under the height-adjustable coffee spout (11).

Press the maintenance key (C).

 RINSING



 COFFEE READY



You can also trigger a rinsing cycle manually from the main- tenance menu at any point in time (see Chapter 15.3).

With manually triggered rinsing, all the spouts that were used are rinsed.

7.Making coffee

(1 espresso, 2 espressos, 1 coffee, 2 coffees)

 COFFEE READY



Place 1 or 2 cups (as required) under the adjustable coffee spout

(11)and press the corresponding symbol , , , . The pre-brewing process (I.P.B.A.S.) moistens the coffee powder, briefly interrupts the flow of hot water and then begins with the actual brewing process.

 1 ESPRESSO (example)

 STRONG (example)

The coffee brewing process stops automatically as soon as the set amount of water has run through.

 COFFEE READY



 

 

To stop the brewing process prematurely, press any of the

E

 

 

 

 

draw-off keys.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can pre-select the strength of your coffee when the ma-

 

 

 

 

 

 

 

 

 

chine is ready to brew (

PLEASE SELECT) To do

 

 

 

so, turn the Rotary Switch (B) until the display indicates the

 

 

 

desired coffee strength and then press a coffee key of your

 

 

 

choice , , ,

.

 

 

You can change the amount of water to be used while the machine is brewing coffee. To do so, turn the Rotary Switch

(B)until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML.

The amounts given in ML are approximate values and may vary from the effective quantity.

8. Making special coffee

 COFFEE READY



Place 1 cup under the cappuccino nozzle (4) and press the Special Coffee key . The pre-brewing process (I.P.B.A.S.) moistens the coffee powder, briefly interrupts the flow of hot water and then begins with the actual brewing process.

 SPECIAL CUP

 MILD (example)

The coffee brewing process stops automatically as soon as the set amount of water has run through.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Precautions Safety information 1.1 WarningIntroduction Preparing the Impressa Z5 2.1 Check supply voltageCheck electrical fuse Adjusting the grinding gearFill water tank Fill coffee beansStainless steel vacuum milk container 16b Power switchFirst use Cup illumination Adjusting your machine to the water hardnessInstalling the filter Using the Claris plus filter cartridge Filter Rins Changing the filter Unit is Heating  Coffee Ready  Coffee Ready  FILTER-CHANGEMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees Rinsing the machineMaking special coffee  Rinsing  Coffee ReadyCappuccino rinsing cycle Cappuccino Making cappuccino Cappuccino  Milk  CappuccinoCappuccino cleaning cycle  Machine is Cleaning  Coffee Ready Cleaning the cappuccino nozzleMaking hot milk Making hot waterSwitching the Impressa off Brewing coffee using pre-ground coffee powder Goodbye Cappuccino setting Rinse Left Spout  Press Button  Enough ?  Press ButtonSetting the amount of hot water Milk setting Enough Water  Press Button Programming MaintenanceProgramming the filter  Rinse UnitProgramming the coffee strength Programming the milk Cappuccino programmingSave energy Save energy No Setting the timeSave energy Level  TimeProgramming the automatic switch-off time Programming the automatic switch-on time Unit on Unit on Minutes OFF After Information Information  1 EspressoRenaming Programming the display Programming the languageChanging the units Changing the time format Maintenance Filling the water tankEmptying the drip tray Emptying the coffee groundsDrip tray missing Grounds container missingFilling the bean tank Information about cleaning cycleAroma preservation cover missing Removing stones from the grinding gearInformation about decalcify CleaningEmptying the system Decalcifying  Machine is Cleaning Tray / Grounds  Empty  ADD Tablet Machine is Decalcifying  Solvent in Tank  Press Button Machine is Decalcifying  Unit is Heating Tips for perfect coffee DisposalProblem Cause Remedy ProblemsLegal information Technical data
Top Page Image Contents