MACHINE IS CLEANING
COFFEE READY
9.4 Cleaning the cappuccino nozzle
Despite the cappuccino cleaning cycle, you should regularly disassemble the cappuccino nozzle and rinse it under running water.
Remove the cappuccino nozzle from the IMPRESSA and take it apart as shown in Fig. 11.
Thoroughly rinse all the parts of the nozzle under running water.
IMPRESSA.
10. Making hot milk
COFFEE READY
Take the milk hose out of the Welcome Pack. (We recommend using the short hose with the vacuum milk container and the long hose with a milk carton). Connect the hose with the suction pipe projecting from the vacuum milk container. Then attach the other end of the hose to the cappuccino nozzle (Fig. 8).
Turn the selector switch (1, Fig. 9) to “Milk” (b, Fig. 9).
Place 1 cup or 1 glass under the cappuccino nozzle (4) and press the Milk key 
.
MILK
20 SEC (example)
The machine stops dispensing milk automatically as soon as the set amount of milk (in SEC) has been dispensed.
COFFEE READY
To stop the machine dispensing milk prematurely, press any of the product keys.
10 min. after having made cappuccino or frothed milk, your IMPRESSA will prompt you to run a cappuccino rinsing cycle. The prompt appears on the display (see Chapter 9.2 Cappuccino rinsing cycle).
You can change the amount of milk set while the machine is dispensing milk. To do so, turn the Rotary Switch (B) until the display indicates the required SEC.
We recommend running the cappuccino cleaning cycle daily if you make cappuccino or frothed milk (see Chapter 9.3 Cappuccino cleaning cycle).
11. Making hot water
COFFEE READY
Place 1 cup or 1 glass under the 
.
HOT WATER
PORTION
The machine stops dispensing water automatically as soon as the programmed amount of water has been dispensed.
COFFEE READY
To stop the machine dispensing hot water prematurely, press any of the product keys.
16