COFFEE READY
Press the Rotary Switch (B) until you hear an acoustic signal.
FILTER
NO
Turn the Rotary Switch (B) until the following message is dis- played:
HARDNESS
16°dH
Now press the Rotary Switch (B) to start programming.
HARDNESS
16°dH
Now turn the Rotary Switch until the correct water hardness is set.
HARDNESS
20°dH (example)
Confirm the selected setting by pressing the Rotary Switch (B).
CONFIRMED
√
HARDNESS
20°dH (example)
Now turn the Rotary Switch (B) until the following message is displayed:
EXIT
Now press the Rotary Switch (B) to leave the programming mode.
COFFEE READY
5. Using the CLARIS plus filter cartridge
When using the CLARIS plus filter cartridge correctly, decalcifying your IMPRESSA will no longer be necessary. For more information on the CLARIS plus filter cartridge refer to brochure “CLARIS plus. Hard on limescale. Gentle
on your coffee machine.” | E | |
5.1 Installing the filter | ||
|
Press the Rotary Switch (B) until you hear an acoustic signal.
FILTER
NO
Now press the Rotary Switch (B) to start programming.
Turn the Rotary Switch (B) until the following message is dis- played:
FILTER
YES
Confirm your setting by pressing the Rotary Switch (B).
CONFIRMED
√
INSERT FILTER
PRESS BUTTON
Remove the water tank from the IMPRESSA. Empty out any remaining water. Fold up the cartridge holder (Fig.6). Attach the extension piece (contained in the Welcome Pack) to the top of the CLARIS plus filter cartridge. Now insert the filter cartridge in the water tank, applying gentle pressure (Fig. 6)
Close the cartridge holder until it engages audibly.
Fill the water tank with cold, fresh tap water and place it back into the machine.
11