Jura Capresso Z5 manual Disposal, Tips for perfect coffee

Page 35

You will hear an acoustic signal.

TRAY / GROUNDS

EMPTY

Empty the drip tray (1) and the coffee grounds tray with the container (3).

TRAY

MISSING

Place the empty, clean drip tray (1) and the coffee grounds tray with the container (3) back into the IMPRESSA.

COFFEE READY

You can also trigger a decalcifying cycle manually from the maintenance menu at any point in time (see Chapter 15.3).

19. Disposal

Please return the IMPRESSA to your local dealer, the service shop or to JURA for proper disposal.

20. Tips for perfect coffee
Height-adjustable coffee spout (11)
You can adjust the height of the coffee spout to the size of your
cups.
cups.		E
Grinding degree
Refer to Chapter 2.5 “Adjusting the grinding gear”.
Refer to Chapter 2.5 “Adjusting the grinding gear”.
Preheating cups
You can preheat the cups with hot water. The smaller the quantity
of coffee you make, the more important preheating is.
Sugar and cream
Stirring coffee/tea will result in heat being released. Adding refrig-
erated cream or milk will reduce the temperature of the coffee sig-
nificantly.

35

Image 35

Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Preparing the Impressa Z5 2.1 Check supply voltage Safety information 1.1 WarningPrecautions IntroductionFill coffee beans Adjusting the grinding gearCheck electrical fuse Fill water tankFirst use Power switchStainless steel vacuum milk container 16b Cup illumination Adjusting your machine to the water hardnessInstalling the filter Using the Claris plus filter cartridge Coffee Ready FILTER-CHANGE Changing the filter Filter Rins Unit is Heating Coffee Ready Rinsing Coffee Ready Rinsing the machineMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees Making special coffee Cappuccino Cappuccino Making cappuccinoCappuccino rinsing cycle Cappuccino MilkCappuccino cleaning cycle Making hot water Cleaning the cappuccino nozzle Machine is Cleaning Coffee Ready Making hot milkSwitching the Impressa off Brewing coffee using pre-ground coffee powder Enough ? Press Button Cappuccino setting Goodbye Rinse Left Spout Press Button Enough Water Press Button Milk settingSetting the amount of hot water Rinse Unit MaintenanceProgramming Programming the filterProgramming the coffee strength Programming the milk Cappuccino programmingSave energy Time Setting the timeSave energy No Save energy LevelUnit on Minutes Programming the automatic switch-on timeProgramming the automatic switch-off time Unit on 1 Espresso Information OFF After InformationRenaming Changing the units Programming the languageProgramming the display Changing the time format Maintenance Filling the water tankGrounds container missing Emptying the coffee groundsEmptying the drip tray Drip tray missingRemoving stones from the grinding gear Information about cleaning cycleFilling the bean tank Aroma preservation cover missingEmptying the system CleaningInformation about decalcify ADD Tablet Machine is CleaningDecalcifying Tray / Grounds Empty Machine is Decalcifying Unit is Heating Solvent in Tank Press Button Machine is Decalcifying Tips for perfect coffee DisposalProblem Cause Remedy ProblemsLegal information Technical data