Jura Capresso Z5 manual Save energy No, Save energy Level, Setting the time,  Time

Page 24

Now press the Rotary Switch (B) to leave the programming mode.

 COFFEE READY



Save energy: No

Selecting this level puts the IMPRESSA in constant stand-by mode.

This setting allows you to make coffee or frothed milk without having to wait for the machine to heat up.

This setting is useful if you make a lot of coffee and milk products and want your machine to be in stand-by all the time.

Save energy: Level 1

Selecting this level puts the IMPRESSA in constant stand-by mode for making coffee. The machine is heated up separately to make frothed milk.

This setting is useful if you mostly make black coffees and are prepared to wait for 1 minute before being able to froth milk.

Save energy: Level 2

Selecting this level does not put the IMPRESSA in stand-by mode (economy temperature). The machine heats up separately each time you make coffee or frothed milk.

The machine switches to economy temperature 5 minutes after you last used it.

This setting is useful if you make very few coffees (with or without milk) and are prepared to wait 30 seconds for the machine to get ready.

15.9 Setting the time

You already set the time when you used the IMPRESSA for the first time. This programming option allows you to modify that setting.

 COFFEE READY



Press the Rotary Switch (B) until you hear an acoustic signal.

 FILTER

 NO or YES

Turn the Rotary Switch (B) until the following message is dis- played:

 TIME

 12:45 (example)

Now press the Rotary Switch (B) to start programming.

 TIME

 HOURS 12:45

Turn the Rotary Switch (B) to set the hours.

 TIME

 HOURS 13:45 (example)

Press the Rotary Switch (B) to confirm the hours and to activate the minutes.

 TIME

 MINUTES 13:45

Turn the Rotary Switch (B) to set the minutes.

 TIME

 13:50 (example)

Confirm the minutes by pressing the Rotary Switch (B).

 CONFIRMED



24

Image 24
Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Safety information 1.1 Warning PrecautionsIntroduction Preparing the Impressa Z5 2.1 Check supply voltageAdjusting the grinding gear Check electrical fuseFill water tank Fill coffee beansPower switch Stainless steel vacuum milk container 16bFirst use Adjusting your machine to the water hardness Cup illuminationUsing the Claris plus filter cartridge Installing the filterChanging the filter  Filter Rins Unit is Heating  Coffee Ready  Coffee Ready  FILTER-CHANGERinsing the machine Making coffee Espresso, 2 espressos, 1 coffee, 2 coffeesMaking special coffee  Rinsing  Coffee ReadyCappuccino Making cappuccino Cappuccino rinsing cycle Cappuccino  Milk  CappuccinoCappuccino cleaning cycle Cleaning the cappuccino nozzle  Machine is Cleaning  Coffee ReadyMaking hot milk Making hot waterBrewing coffee using pre-ground coffee powder Switching the Impressa offCappuccino setting  Goodbye Rinse Left Spout  Press Button  Enough ?  Press ButtonMilk setting Setting the amount of hot water Enough Water  Press Button Maintenance ProgrammingProgramming the filter  Rinse UnitProgramming the coffee strength Cappuccino programming Programming the milkSave energy Setting the time Save energy NoSave energy Level  TimeProgramming the automatic switch-on time Programming the automatic switch-off time Unit on Unit on MinutesInformation  OFF After Information  1 EspressoRenaming Programming the language Programming the displayChanging the units Maintenance Filling the water tank Changing the time formatEmptying the coffee grounds Emptying the drip trayDrip tray missing Grounds container missingInformation about cleaning cycle Filling the bean tankAroma preservation cover missing Removing stones from the grinding gearCleaning Information about decalcifyEmptying the system  Machine is Cleaning Decalcifying Tray / Grounds  Empty  ADD Tablet Solvent in Tank  Press Button  Machine is Decalcifying Machine is Decalcifying  Unit is Heating Disposal Tips for perfect coffeeProblems Problem Cause RemedyTechnical data Legal information