Jura Capresso Z5 manual Cappuccino setting,  Goodbye,  Rinse Left Spout  Press Button

Page 18

Switch the IMPRESSA off with the ON / OFF switch (A).

 GOODBYE



The coffee spout is rinsing.

 RINSE LEFT SPOUT

 PRESS BUTTON

Press the maintenance key (C) to continue rinsing.

 GOODBYE



When switching the machine off, there may be a hissing sound. This is due to a normal process being performed by the system.

It is recommended to switch off the machine with the power switch if you intend not to use your IMPRESSA for a longer time.

14. Settings

14.1Setting the amount of water for coffee, espresso (1 and 2 cups) and special coffee

The system’s basic settings include pre-defined amounts of water (coffee 130 ml, espresso 60 ml, 2 coffees 260 ml, 2 espressos 120 ml, special coffee 145 ml). However, these can be modified as required.

 COFFEE READY



Place a cup under the respective coffee spout (17).

Press the product key to be programmed and hold it down until the following message appears:

 1 COFFEE (example)

 NORMAL (example)

The coffee will be brewed. Keep on holding the key down until the following message is displayed:

 ENOUGH ?

 PRESS BUTTON

When you have made as much coffee as you wanted, briefly press the key once more.

 CONFIRMED



The amount of coffee made has now been programmed for the selected type of coffee.

 COFFEE READY



14.2 Cappuccino setting

The system’s basic settings include pre-defined amounts of water (100 ml) and milk (15 sec.). However, these amounts can be modified as required.

 COFFEE READY



Place a cup under the cappuccino nozzle (4).

Press the Cappuccino key and hold it down until the follow- ing message appears:

 CAPPUCCINO

 NORMAL (example)

The cappuccino will be brewed. Keep on holding the key down until the following message is displayed:

 ENOUGH MILK

 PRESS BUTTON

18

Image 18
Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Introduction Safety information 1.1 WarningPrecautions Preparing the Impressa Z5 2.1 Check supply voltageFill water tank Adjusting the grinding gearCheck electrical fuse Fill coffee beansPower switch Stainless steel vacuum milk container 16bFirst use Adjusting your machine to the water hardness Cup illuminationUsing the Claris plus filter cartridge Installing the filter Unit is Heating  Coffee Ready Changing the filter Filter Rins  Coffee Ready  FILTER-CHANGEMaking special coffee Rinsing the machineMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees  Rinsing  Coffee Ready Cappuccino  Milk Cappuccino Making cappuccinoCappuccino rinsing cycle  CappuccinoCappuccino cleaning cycle Making hot milk Cleaning the cappuccino nozzle Machine is Cleaning  Coffee Ready Making hot waterBrewing coffee using pre-ground coffee powder Switching the Impressa off Rinse Left Spout  Press Button Cappuccino setting Goodbye  Enough ?  Press ButtonMilk setting Setting the amount of hot water Enough Water  Press Button Programming the filter MaintenanceProgramming  Rinse UnitProgramming the coffee strength Cappuccino programming Programming the milkSave energy Save energy Level Setting the timeSave energy No  Time Unit on Programming the automatic switch-on timeProgramming the automatic switch-off time Unit on Minutes Information Information OFF After  1 EspressoRenaming Programming the language Programming the displayChanging the units Maintenance Filling the water tank Changing the time formatDrip tray missing Emptying the coffee groundsEmptying the drip tray Grounds container missingAroma preservation cover missing Information about cleaning cycleFilling the bean tank Removing stones from the grinding gearCleaning Information about decalcifyEmptying the system  Tray / Grounds  Empty  Machine is CleaningDecalcifying  ADD Tablet Solvent in Tank  Press Button  Machine is Decalcifying Machine is Decalcifying  Unit is Heating Disposal Tips for perfect coffeeProblems Problem Cause RemedyTechnical data Legal information