Jura Capresso Z5 manual Save energy

Page 23



Press the Rotary Switch (B) until you hear an acoustic signal.

 FILTER

 NO or YES

Turn the Rotary Switch (B) until the following message is dis- played:

 MILK

 20 SEC (example)

Now press the Rotary Switch (B) to start programming.

 MILK

 20 SEC (example)

Now turn the Rotary Switch (B) until the required amount of milk is set.

 MILK

 28 SEC (example)

Confirm the selected setting by pressing the Rotary Switch (B).

 CONFIRMED



 MILK

 28 SEC (example)

Now turn the Rotary Switch (B) until the following message is displayed:

 EXIT



Now press the Rotary Switch (B) to leave the programming mode.

 COFFEE READY



15.8 Save energy

You can set your machine to various power saving modes.

 COFFEE READY



 

E

 Press the Rotary Switch (B) until you hear an acoustic signal.



FILTER

 



NO or YES

 

 Turn the Rotary Switch (B) until the following message is dis-

 

 

played:

 



ENERGY

 



SAVE NO

 

 Now press the Rotary Switch (B) to start programming.

 



ENERGY

 



SAVE NO

 

 Now turn the Rotary Switch (B) until the required power saving

 

 

mode is displayed.

 



ENERGY

 



SAVE LEVEL 2 (example)

 

 Confirm the selected setting by pressing the Rotary Switch (B).

 



CONFIRMED

 



 



ENERGY

 



SAVE LEVEL 2 (example)

 

 Now turn the Rotary Switch (B) until the following message is

 

 

displayed:

 



EXIT

 



 

 

23

Image 23
Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Preparing the Impressa Z5 2.1 Check supply voltage Safety information 1.1 WarningPrecautions IntroductionFill coffee beans Adjusting the grinding gearCheck electrical fuse Fill water tankFirst use Power switchStainless steel vacuum milk container 16b Cup illumination Adjusting your machine to the water hardnessInstalling the filter Using the Claris plus filter cartridge Coffee Ready  FILTER-CHANGE Changing the filter Filter Rins  Unit is Heating  Coffee Ready Rinsing  Coffee Ready Rinsing the machineMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees Making special coffee Cappuccino Cappuccino Making cappuccinoCappuccino rinsing cycle  Cappuccino  MilkCappuccino cleaning cycle Making hot water Cleaning the cappuccino nozzle Machine is Cleaning  Coffee Ready Making hot milkSwitching the Impressa off Brewing coffee using pre-ground coffee powder Enough ?  Press Button Cappuccino setting Goodbye  Rinse Left Spout  Press Button Enough Water  Press Button Milk settingSetting the amount of hot water  Rinse Unit MaintenanceProgramming Programming the filterProgramming the coffee strength Programming the milk Cappuccino programmingSave energy  Time Setting the timeSave energy No Save energy LevelUnit on Minutes Programming the automatic switch-on timeProgramming the automatic switch-off time  Unit on 1 Espresso Information OFF After  InformationRenaming Changing the units Programming the languageProgramming the display Changing the time format Maintenance Filling the water tankGrounds container missing Emptying the coffee groundsEmptying the drip tray Drip tray missingRemoving stones from the grinding gear Information about cleaning cycleFilling the bean tank Aroma preservation cover missingEmptying the system CleaningInformation about decalcify  ADD Tablet  Machine is CleaningDecalcifying  Tray / Grounds  Empty Machine is Decalcifying  Unit is Heating  Solvent in Tank  Press Button Machine is Decalcifying Tips for perfect coffee DisposalProblem Cause Remedy ProblemsLegal information Technical data