Jura Capresso Z5 manual Cappuccino programming, Programming the milk

Page 22



 AROMA



Now turn the Rotary Switch (B) until the following message is displayed:

 EXIT



Now press the Rotary Switch (B) to leave the programming mode.

 COFFEE READY



15.6 Cappuccino programming

You can also make the cappuccino settings in the program- ming mode or as described in Chapter 14.2 “Cappuccino set- ting”.

 COFFEE READY



Press the Rotary Switch (B) until you hear an acoustic signal.

 FILTER

 NO or YES

Turn the Rotary Switch (B) until the following message is dis- played:

 CAPPUCCINO

 MILK 15 SEC (example)

Now press the Rotary Switch (B) to start programming.

 CAPPUCCINO

 MILK 15 SEC (example)

Now turn the Rotary Switch (B) until the required amount of milk is set.

 CAPPUCCINO

 MILK 12 SEC (example)

Confirm the selected setting by pressing the Rotary Switch (B).

 CONFIRMED



 CAPPUCCINO

 COFFEE 100 ML (example)

Now turn the Rotary Switch (B) until the required amount of coffee is set.

 CAPPUCCINO

 COFFEE 110 ML (example)

Confirm the selected setting by pressing the Rotary Switch (B).

 CONFIRMED



 CAPPUCCINO

 MILK 12 SEC (example)

Now turn the Rotary Switch (B) until the following message is displayed:

 EXIT



Now press the Rotary Switch (B) to leave the programming mode.

 COFFEE READY



15.7 Programming the milk

You can also set the amount of milk in the programming mode or as described in Chapter 14.3 “Milk setting”.

 COFFEE READY

22

Image 22
Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Introduction Safety information 1.1 WarningPrecautions Preparing the Impressa Z5 2.1 Check supply voltageFill water tank Adjusting the grinding gearCheck electrical fuse Fill coffee beansStainless steel vacuum milk container 16b Power switchFirst use Adjusting your machine to the water hardness Cup illuminationUsing the Claris plus filter cartridge Installing the filter Unit is Heating  Coffee Ready Changing the filter Filter Rins  Coffee Ready  FILTER-CHANGEMaking special coffee Rinsing the machineMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees  Rinsing  Coffee Ready Cappuccino  Milk Cappuccino Making cappuccinoCappuccino rinsing cycle  CappuccinoCappuccino cleaning cycle Making hot milk Cleaning the cappuccino nozzle Machine is Cleaning  Coffee Ready Making hot waterBrewing coffee using pre-ground coffee powder Switching the Impressa off Rinse Left Spout  Press Button Cappuccino setting Goodbye  Enough ?  Press ButtonSetting the amount of hot water Milk setting Enough Water  Press Button Programming the filter MaintenanceProgramming  Rinse UnitProgramming the coffee strength Cappuccino programming Programming the milkSave energy Save energy Level Setting the timeSave energy No  Time Unit on Programming the automatic switch-on timeProgramming the automatic switch-off time Unit on Minutes Information Information OFF After  1 EspressoRenaming Programming the display Programming the languageChanging the units Maintenance Filling the water tank Changing the time formatDrip tray missing Emptying the coffee groundsEmptying the drip tray Grounds container missingAroma preservation cover missing Information about cleaning cycleFilling the bean tank Removing stones from the grinding gearInformation about decalcify CleaningEmptying the system  Tray / Grounds  Empty  Machine is CleaningDecalcifying  ADD Tablet Machine is Decalcifying  Solvent in Tank  Press Button Machine is Decalcifying  Unit is Heating Disposal Tips for perfect coffeeProblems Problem Cause RemedyTechnical data Legal information