Jura Capresso Z5 manual Programming the coffee strength

Page 21

COFFEE READY

Press the Rotary Switch (B) until you hear an acoustic signal.

FILTER

NO or YES

Turn the Rotary Switch (B) until the following message is dis- played:

TEMPERATURE

Press the Rotary Switch (B) to start programming.

TEMPERATURE

COFFEE READY

Then press a product key of your choice.

1 ESPRESSO (example)

NORMAL

Turn the Rotary Switch until the required temperature is set.

1 ESPRESSO (example)

HIGH (example)

Confirm the selected setting by pressing the Rotary Switch (B).

CONFIRMED

√

TEMPERATURE

Turn the Rotary Switch (B) until the following message is dis- played:

EXIT

Now press the Rotary Switch (B) to leave the programming mode.

COFFEE READY

15.5 Programming the coffee strength

You can adjust the strength of each individual coffee product separately. The coffee strength can be set to 5 different levels E

(VERY MILD , MILD , NORMAL ,

STRONG , XSTRONG ).

COFFEE READY

Press the Rotary Switch (B) until you hear an acoustic signal.

FILTER

NO or YES

Turn the Rotary Switch (B) until the following message is dis- played:

AROMA

Now press the Rotary Switch (B) to start programming.

AROMA

COFFEE READY

Then press a product key of your choice.

1 ESPRESSO (example)

NORMAL

Turn the Rotary Switch (B) until the following message is dis- played:

1 ESPRESSO (example)

STRONG (example)

Confirm the selected setting by pressing the Rotary Switch (B).

CONFIRMED

21

Image 21

Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Precautions Safety information 1.1 WarningIntroduction Preparing the Impressa Z5 2.1 Check supply voltageCheck electrical fuse Adjusting the grinding gearFill water tank Fill coffee beansPower switch Stainless steel vacuum milk container 16bFirst use Cup illumination Adjusting your machine to the water hardnessInstalling the filter Using the Claris plus filter cartridge Filter Rins Changing the filter Unit is Heating Coffee Ready Coffee Ready FILTER-CHANGEMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees Rinsing the machineMaking special coffee Rinsing Coffee ReadyCappuccino rinsing cycle Cappuccino Making cappuccino Cappuccino Milk CappuccinoCappuccino cleaning cycle Machine is Cleaning Coffee Ready Cleaning the cappuccino nozzleMaking hot milk Making hot waterSwitching the Impressa off Brewing coffee using pre-ground coffee powder Goodbye Cappuccino setting Rinse Left Spout Press Button Enough ? Press ButtonMilk setting Setting the amount of hot water Enough Water Press Button Programming MaintenanceProgramming the filter Rinse UnitProgramming the coffee strength Programming the milk Cappuccino programmingSave energy Save energy No Setting the timeSave energy Level TimeProgramming the automatic switch-off time Programming the automatic switch-on time Unit on Unit on Minutes OFF After Information Information 1 EspressoRenaming Programming the language Programming the displayChanging the units Changing the time format Maintenance Filling the water tankEmptying the drip tray Emptying the coffee groundsDrip tray missing Grounds container missingFilling the bean tank Information about cleaning cycleAroma preservation cover missing Removing stones from the grinding gearCleaning Information about decalcifyEmptying the system Decalcifying Machine is Cleaning Tray / Grounds Empty ADD Tablet Solvent in Tank Press Button Machine is Decalcifying Machine is Decalcifying Unit is Heating Tips for perfect coffee DisposalProblem Cause Remedy ProblemsLegal information Technical data