Jura Capresso Z5 Milk setting, Setting the amount of hot water,  Enough Water  Press Button

When the machine has dispensed as much milk as you wanted, briefly press the key once more.

 CONFIRMED

 √

The amount of milk to be dispensed is now programmed.

 ENOUGH ?

 PRESS BUTTON

When you have made as much coffee as you wanted, briefly press the key once more.

 CONFIRMED

 √

The amount of coffee to be made is now programmed.

You can also make the cappuccino settings in the program- ming mode (see Chapter 15.6)

14.3 Milk setting

The system’s basic settings include a pre-defined amount of milk (20 sec.). However, this amount can be modified as required.

 COFFEE READY



Place a cup under the cappuccino nozzle (4).

Press the Milk key and hold it down until the following mes- sage appears:

 MILK

 20 SEC (example)

The milk will be dispensed. Keep on holding the key down until the following message is displayed:

 ENOUGH MILK

 PRESS BUTTON

When the machine has dispensed as much milk as you wanted, briefly press the key once more.

 CONFIRMED

 √

The amount of milk to be used is now programmed.

	You can also set the amount of milk in the programming	E
	mode (see Chapter 15.7)
14.4 Setting the amount of hot water
The system’s basic settings include a pre-defined amount of water
(225 ml). However, this amount can be modified as required.

 COFFEE READY



Place a cup under the hot water spout (12).

Press the Hot Water key and hold it down until the following message appears:

 HOT WATER

 PORTION

Machine dispenses hot water. Keep on holding the key down until the following message is displayed:

 ENOUGH WATER

 PRESS BUTTON

When the machine has dispensed as much hot water as you wanted, briefly press the key once more.

 CONFIRMED

 √

The amount of water to be dispensed is now programmed.

19