Jura Capresso Z5 manual Changing the time format, Maintenance Filling the water tank

Page 29

Now turn the Rotary Switch (B) until the following message is displayed:

EXIT

Now press the Rotary Switch (B) to leave the programming mode.

COFFEE READY

Changing the time format

COFFEE READY

Press the Rotary Switch (B) until you hear an acoustic signal.

FILTER

NO or YES

Turn the Rotary Switch (B) until the following message is dis- played:

SETTINGS

Now press the Rotary Switch (B) to start programming.

SETTINGS

UNIT

Turn the Rotary Switch (B).

SETTINGS

TIME FORMAT

Press the Rotary Switch (B).

SETTINGS

FORMAT 24 HRS

Turn the Rotary Switch (B) to change the format.

		SETTINGS
		FORMAT AM/PM
	Confirm your selection by pressing the Rotary Switch (B).
		CONFIRMED
		√	E
		SETTINGS	E
		SETTINGS

Now turn the Rotary Switch (B) until the following message is displayed:

EXIT

Now press the Rotary Switch (B) to leave the programming mode.

COFFEE READY

16. Maintenance

16.1 Filling the water tank

WATER TANK

FILL

If this information is displayed, the machine will no longer produce coffee, hot water or milk. Refill water as described in Chapter 2.3.

COFFEE READY

The water tank should be rinsed out and filled with fresh water daily. Always use fresh, cold water. Never fill the water tank with milk, mineral water or other liquids.

29

Image 29

Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Precautions Safety information 1.1 WarningIntroduction Preparing the Impressa Z5 2.1 Check supply voltageCheck electrical fuse Adjusting the grinding gearFill water tank Fill coffee beansFirst use Power switchStainless steel vacuum milk container 16b Cup illumination Adjusting your machine to the water hardnessInstalling the filter Using the Claris plus filter cartridge Filter Rins Changing the filter Unit is Heating Coffee Ready Coffee Ready FILTER-CHANGEMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees Rinsing the machineMaking special coffee Rinsing Coffee ReadyCappuccino rinsing cycle Cappuccino Making cappuccino Cappuccino Milk CappuccinoCappuccino cleaning cycle Machine is Cleaning Coffee Ready Cleaning the cappuccino nozzleMaking hot milk Making hot waterSwitching the Impressa off Brewing coffee using pre-ground coffee powder Goodbye Cappuccino setting Rinse Left Spout Press Button Enough ? Press Button Enough Water Press Button Milk settingSetting the amount of hot water Programming MaintenanceProgramming the filter Rinse UnitProgramming the coffee strength Programming the milk Cappuccino programmingSave energy Save energy No Setting the timeSave energy Level TimeProgramming the automatic switch-off time Programming the automatic switch-on time Unit on Unit on Minutes OFF After Information Information 1 EspressoRenaming Changing the units Programming the languageProgramming the display Changing the time format Maintenance Filling the water tankEmptying the drip tray Emptying the coffee groundsDrip tray missing Grounds container missingFilling the bean tank Information about cleaning cycleAroma preservation cover missing Removing stones from the grinding gearEmptying the system CleaningInformation about decalcify Decalcifying Machine is Cleaning Tray / Grounds Empty ADD Tablet Machine is Decalcifying Unit is Heating Solvent in Tank Press Button Machine is Decalcifying Tips for perfect coffee DisposalProblem Cause Remedy ProblemsLegal information Technical data