Jura Capresso Z5 manual Brewing coffee using pre-ground coffee powder, Switching the Impressa off

Page 17

You can change the amount of water set while the machine is dispensing hot water. To do so, turn the Rotary Switch (B) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML.

The amounts given in ML are approximate values and may vary from the effective quantity.

12. Brewing coffee using pre-ground coffee powder

Never use water-soluble instant coffee.

 COFFEE READY



Place 1 or 2 cups (as required) under the height-adjustable coffee spout (11).

Open the lid of the filler funnel for pre-ground coffee (9). It is under the bean tank cover (7).

 PRE-GROUND

 FILL POWDER

Fill 1 or 2 level scoops of pre-ground coffee into the filler funnel for pre-ground coffee (9) (Fig. 7) and close the lid.

 PRE-GROUND

 COFFEE READY

Then press a key of your choice , , , , , . The machine will brew the coffee with the amount of water pre- selected for it.

 PRE-GROUND



The coffee brewing process stops automatically as soon as the set amount of coffee has been made.

 COFFEE READY



To stop the brewing process prematurely, press any of the keys.

 

 

We recommend always using powder from fresh coffee

E

 

 

 

 

 

 

beans

or pre-ground, vacuum-packed coffee. Never fill in

 

 

 

 

more than 2 scoops of powder. The filler funnel is no storage

 

 

 

tank. Make sure the coffee powder you use is not too fine.

 

 

 

This may block the system and cause the coffee only to drip

 

 

 

out of the coffee spout.

 

 

 

If you have used too little powder, the display will indicate

 

 

 

 

 

 

“NOT ENOUGH”. Your IMPRESSA will stop the process

 

 

 

 

 

 

and return to “COFFEE READY”.

 

 

 

You can also make special coffee or cappuccino using pre-

 

 

 

 

 

 

ground coffee powder.

 

 

 

You can change the amount of water set while the machine

 

 

 

 

 

 

is brewing coffee. To do so, turn the Rotary Switch (B) until

 

 

 

the display indicates the required amount (ML). The amount

 

 

 

of water can be selected in increments of 5 ML.

 

 

 

The amounts given in ML are approximate values and may

 

 

 

 

 

 

vary from the effective quantity.

 

 

 

 

13. Switching the IMPRESSA off

 

When you switch the machine off, all the spouts that were used

 

will be rinsed. Therefore, please make sure to place suitable recep-

 

tacles under the spouts.

 



 

 

COFFEE READY

 



 

 

 

 

17

Image 17
Contents Impressa Z5 Jura Elektroapparate AG, CH-4626 Niederbuchsiten Correct assembly of the cappuccino nozzle F G H I J K L M Description of the machine Contents Precautions Safety information 1.1 WarningIntroduction Preparing the Impressa Z5 2.1 Check supply voltageCheck electrical fuse Adjusting the grinding gearFill water tank Fill coffee beansFirst use Power switchStainless steel vacuum milk container 16b Cup illumination Adjusting your machine to the water hardnessInstalling the filter Using the Claris plus filter cartridge Filter Rins Changing the filter Unit is Heating  Coffee Ready  Coffee Ready  FILTER-CHANGEMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees Rinsing the machineMaking special coffee  Rinsing  Coffee ReadyCappuccino rinsing cycle Cappuccino Making cappuccino Cappuccino  Milk  CappuccinoCappuccino cleaning cycle  Machine is Cleaning  Coffee Ready Cleaning the cappuccino nozzleMaking hot milk Making hot waterSwitching the Impressa off Brewing coffee using pre-ground coffee powder Goodbye Cappuccino setting Rinse Left Spout  Press Button  Enough ?  Press Button Enough Water  Press Button Milk settingSetting the amount of hot water Programming MaintenanceProgramming the filter  Rinse UnitProgramming the coffee strength Programming the milk Cappuccino programmingSave energy Save energy No Setting the timeSave energy Level  TimeProgramming the automatic switch-off time Programming the automatic switch-on time Unit on Unit on Minutes OFF After Information Information  1 EspressoRenaming Changing the units Programming the languageProgramming the display Changing the time format Maintenance Filling the water tankEmptying the drip tray Emptying the coffee groundsDrip tray missing Grounds container missingFilling the bean tank Information about cleaning cycleAroma preservation cover missing Removing stones from the grinding gearEmptying the system CleaningInformation about decalcify Decalcifying  Machine is Cleaning Tray / Grounds  Empty  ADD Tablet Machine is Decalcifying  Unit is Heating  Solvent in Tank  Press Button Machine is Decalcifying Tips for perfect coffee DisposalProblem Cause Remedy ProblemsLegal information Technical data