Quick Rinse (on some models)
Use this rinse cycle for rinsing dishes, glasses, and silverware that will not be washed right away.
Do not use detergent with this cycle.
Wash | Main | Rinse | Final | Dry | Time | Water |
| Wash | or | Heated |
| (rain) | Usage |
|
| Purge | Rinse |
|
| (gal/L) |
|
| • |
|
| 10 | |
|
| Rinse |
|
|
|
*If the incoming water temperature is less than the recommended temperature or food soils are heavy, the cycle will automatically compensate by adding time, heat and water as needed.
1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel.
2.Press CANCEL. The Cancel light glows.
3.Close the door. The dishwasher starts a
To stop the drain
You can press CANCEL again to stop the drain. Remember to drain the dishwasher before starting a new cycle.
To clear the indicators
Press CANCEL before starting the dishwasher to clear all options and cycles.
During the first minute of a cycle
1.Open the door. The Start light begins flashing.
2.Press a new cycle and/or options.
3.Check the detergent dispensers. They must be filled properly for the new cycle.
4.Press START and firmly close the door (on top control models). Or, firmly close the door and press START (on split control models).
After the first minute of a cycle
1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel.
2.Press CANCEL. The Cancel light glows.
3.Close the door. Your dishwasher starts a
NOTE: If your dishwasher does not need draining, the light turns off.
4.Open the door. Select a new cycle and/or options.
5.Check the detergent dispensers. They must be filled properly for the new cycle.
6.Press START and firmly close the door (on top control models). Or, firmly close the door and press START (on split control models).
You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.
To add items
1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door. The Start light begins flashing.
2.Open the door. If the detergent dispenser cover is still closed, add the item.
3.Press START and firmly close the door (on top control models). Or, firmly close the door and press START (on split control models).
You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off, or select a different option if desired.
You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.
Press START to use the same cycle and option(s) as the previous wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when you press Start, the dishwasher runs the last full wash cycle and options.
TURBOZONE TM wash option
Select this option to activate the TURBOZONETM jets and provide intensified water spray to the back of the lower dishrack. The TURBOZONETM wash option provides a concentrated wash action to pots, pans, casseroles, etc. with tough
This option may add heat and wash time to the cycle.
NOTE: TURBOZONETM is an option with the SMART WASH TM, Pots Pans, and Normal Wash cycles.
IMPORTANT: Load pots, pans, casserole dishes, etc. facing the TURBOZONETM jets in the back of the lower dishrack. Tip items toward the rear of the dishrack to maximize coverage. Only one row of items may face the TURBOZONE TM jets. Stacking, overlapping, or nesting items will prevent the TURBOZONETM jets from reaching all of the surfaces.
Side view of TURBOZONE TM wash area
15