Nilfisk-Advance America SR 1100S B Side Broom Height Check Adjustment, Side Broom Replacement

Page 69

USER MANUAL

ENGLISH

SIDE BROOM HEIGHT CHECK AND

ADJUSTMENT

NOTE

Brooms with harder or softer bristles are available. This procedure is applicable to all types of brooms.

1.Check the side broom distance from the ground, according to the following procedure:

•Drive the machine on a level ground and lower the side brooms.

•Keep the machine stationary and turn on the side brooms for a few seconds.

•Lift the side brooms, then move the machine and turn it off.

•Check that the side broom prints are as shown in the fi gure (A and B, Fig. 7).

If the print is not within specifi cations, adjust the broom height, according to the procedure shown in step 2.

2.Engage the parking brake with the pedal (3) and the lever

(4).

3.Turn the ignition key (72) to "0".

4.Loosen the knob (A, Fig. 8) positioned above the broom.

5.Turn the knob (B, Fig. 8) and remind that:

•It must be screwed to lift the broom;

•It must be unscrewed to lower the broom.

After the adjustment, hold the knob (B) and tighten the knob (A).

6.Perform step 1 again to check the proper adjustment of the side broom height.

7.When the brooms are too worn and can no longer be adjusted, replace them according to the procedure shown in the relevant paragraph.

SIDE BROOM REPLACEMENT

NOTE

Brooms with harder or softer bristles are available. This procedure is applicable to all types of brooms.

CAUTION!

It is advisable to wear protective gloves when replacing the side brooms because there can be sharp debris between the bristles.

1.Drive the machine on a level ground and engage the parking brake with the pedal (3) and the lever (4).

2.Turn the ignition key (82) to "0".

3.Lay the hand inside the side broom and press the tabs (A, Fig. 9) inwards, then remove the broom (B) by disengaging it from the four pins (C).

4.Install the new side broom by engaging it on the pins (C, Fig. 9) and on the tabs (A).

5.Check and adjust the side broom height as shown in the previous paragraph.

S311394

Figure 7

S311395

Figure 8

S311396

Figure 9

SR 1100S B

146 2494 000(2)2007-02 A

19

Page 68 Page 70
Image 69
Page 68 Page 70
Contents 146 2494 00022007-02 a Sweeper SR 1100S BSR 1100S B SweeperEinleitung InhaltsverzeichnisEinleitung AUSPACKEN/AUSLIEFERUNG Benutzte Symbole SicherheitAllgemeine Hinweise Betriebsanleitung Deutsch Maschinenaufbau Maschinenbeschreibung4341 4750 Maschinenaufbau fortgesetztZUBEHÖRE/OPTIONEN Schalttafel UND BedienelementeAllgemein Werte Technische DatenLeistungen Werte Batterien WerteFarbencodes SchaltplanSchaltplan fortgesetzt PRÜFUNG/VORBEREITUNG DER Batterien AN Einer Neuen Maschine BetriebVOR DEM Anlassen DER Maschine MaschineneinstellungEinstellung des Ladegeräts Maschinenanlassen UND -ABSTELLEN MaschinenanlassenMaschinenabstellen Entleerung DES Abfallbehälters Maschine in BetriebNach DER Maschinenbenutzung SCHUB-/SCHLEPPBEWEGUNG DER MaschineÜbersichtstabelle DER Planmässigen Wartung WartungVorgang Bei Auslieferung AllePrüfung UND Einstellung DER Hauptkehrwalzenhöhe Die entsprechende Nabe a eingefügt wird Ersetzen DER HauptkehrwalzeErsetzung DER Seitenbesen Prüfung UND Einstellung DER SeitenbesenhöheReinigung UND Vollständigkeitsprüfung Desb C E Staubfilters Prüfung DER Flapshöhe UND Funktionsfähigkeit Prüfung der SeitenflapsPrüfung der Vorder- und Hinterflaps Batterieladung Batterieladung durch externes LadegerätBatterieladung durch externes Ladegerät Option Prüfung/Ersetzung der Flachsicherungen PRÜFUNG/ERSETZUNG/RÜCKSCHALTUNG DER SicherungenPrüfung der rückschaltbaren Sicherungen EinbauFehlersuche VerschrottungFehler Mögliche Ursache Lösung Introduction Table DES MatieresIntroduction Deballage / Livraison Symboles Utilises SecuriteInstructions Generales Manuel Dutilisation Français Structure DE LA Machine Description DE LA MachineStructure DE LA Machine suite Accessoires / Options Tableau DE Bord ET CommandesCaractéristiques générales Valeurs Caracteristiques TechniquesPerformances Valeurs Batteries ValeursSchema Electrique LégendeCodes des couleurs Schema Electrique suite Controle / Preparation DES Batteries SUR UNE Machine Neuve UtilisationAvant LA Mise EN Marche Configuration DU Type DE Batteries Installees WET OU GELConfiguration de la machine Configuration du chargeur de batterieMise EN Marche ET Arret DE LA Machine Mise en marche de la machineArrêt de la machine Machine AU Travail Deplacement PAR Poussee / Remorquage DE LA MachineVidange DU Conteneur Dechets Apres Lutilisation DE LA MachinePlan Dentretien Programme EntretienControle ET Reglage DE LA Hauteur DU Balai Central Remplacement DU Balai Central Controle ET Reglage DE LA Hauteur DES Balais Lateraux Remplacement DES Balais LaterauxNettoyage ET Controle DE Lintegrite DU Filtre a Poussiere Controle DE LA Hauteur ET DU Fonctionnement DES Volets Contrôle des volets latérauxContrôle des volets avant et arrière Chargement des batteries avec chargeur de batterie externe Chargement DES BatteriesContrôle / remplacement des fusibles à lamelle Controle / Remplacement Retablissement DES FusiblesContrôle des fusibles restaurables ReposeDepistage DES Pannes Mise EN DechargeProblème Cause probable Remède Table of Contents HOW to Keep this Manual Declaration of Conformity Manual Purpose and ContentsTarget Identification DataUNPACKING/DELIVERY Spare Parts and MaintenanceOther Reference Manuals Changes and ImprovementsSafety SymbolsGeneral Instructions English Machine Structure Machine DescriptionMachine Structure Continues Control Panel ACCESSORIES/OPTIONSGeneral Values Technical DataPerformance Values Batteries ValuesWiring Diagram KeyColour code Wiring Diagram Continues USE Battery CHECK/SETTING on a NEW MachineMachine setting WET or GEL Battery SettingBattery charger setting Before Starting the MachineStarting and Stopping the Machine Starting the machineStopping the machine Hopper Emptying Machine OperationAfter Machine USE PUSHING/TOWING the MachineScheduled Maintenance Table MaintenanceProcedure Upon delivery 200 400Main Broom Height Check Adjustment Main Broom Replacement Side Broom Replacement Side Broom Height Check AdjustmentDust Filter Cleaning and Integrity Check Skirt Height and Operation Check Side skirt checkFront and rear skirt check Battery Charging Charging the batteries with an external battery chargerCharging the batteries with the battery charger optional Lamellar fuse check/replacement Fuse CHECK/REPLACEMENT/RESETAssembly Circuit breaker checkTroubleshooting ScrappingTrouble Possible cause Remedy Inleiding InhoudsopgaveInleiding Verpakking VERWIJDEREN/AFLEVERING Gebruikte Symbolen VeiligheidAlgemene Instructies Gebruiksaanwijzing Nederlands Bouw VAN DE Machine Beschrijving VAN DE MachineOpbouw VAN DE Machine vervolg Bedieningspaneel EN Knoppen Accessoires / OptiesAlgemeen Waarden Technische EigenschappenPrestaties Waarden Accus WaardenKleurcodering Elektrisch SchemaElektrische Installatie vervolg Controle / Voorbereidingen Voor Accus OP EEN Nieuwe Machine GebruikVoor HET Starten VAN DE Machine Instelling VAN HET Type Gemonteerde Accu WET of GELAfstelling van de machine De acculader instellenDE Machine Starten EN Stoppen Starten van de machineDe machine stoppen DE Afvalcontainer Legen Machine in BedrijfNA Gebruik VAN DE Machine DUW-/TREKBEWEGING VAN DE MachineOnderhoudsschema Procedure Bij afleveringOnderhoud DE Hoogte VAN DE Hoofdborstel Controleren EN Afstellen DE Hoofdborstelvervangen DE Zijborstels Vervangen DE Hoogte VAN DE Zijborstels Controleren EN AfstellenReiniging EN Contole OP Integriteit VAN HET Stoffilter Controle VAN DE Hoogte EN Werking VAN DE Flaps Controle van de zijflapsControle van de voor- en achterflap ACCU’S Opladen Accu’s met externe acculader opladenAccu’s met externe acculader opladen optioneel Controle/vervanging van de smeltzekeringen Controle / Vervanging / Resetten VAN DE ZekeringenControle van de herbruikbare zekeringen MontageStoringen Lokaliseren VerwijderingProbleem Waarschijnlijke oorzaak Oplossing

SR 1100S B specifications

The Nilfisk-Advance America SR 1100S B is a versatile and efficient scrubber dryer that enhances cleaning operations in a variety of settings. Known for its robust design and user-friendly features, this machine is ideal for both small and large facilities, including warehouses, retail spaces, and industrial environments.

One of the main features of the SR 1100S B is its compact and ergonomic design, which allows for easy maneuverability in tight spaces. This enables cleaning staff to efficiently scrub floors without the hassle of navigating bulky equipment. With a cleaning width of 28 inches, it provides effective coverage while ensuring ease of use.

Powered by a durable battery system, the SR 1100S B allows for cord-free operation, adding to its convenience. The model is equipped with an auto-fill feature that simplifies the refilling of the solution tank, saving time in busy environments where every minute counts. The large solution and recovery tanks minimize downtime by reducing the frequency of refills and disposals during cleaning tasks.

The scrubber dryer utilizes advanced motor technology, offering powerful suction and scrubbing capabilities. Its high-performance brushes deliver superior results, effectively removing dirt and grime from different types of flooring, including tile, vinyl, and concrete. The machine also features adjustable down pressure settings, allowing operators to customize performance based on the specific cleaning needs of the surface being treated.

An intuitive control panel enhances user experience, featuring easy-to-read indicators for battery status and operational settings. The SR 1100S B is designed with safety in mind, incorporating user-friendly controls and configurations that reduce the risk of accidents during operation.

Another notable characteristic is the unit's ability to operate with eco-friendly cleaning solutions, promoting a more sustainable approach in daily cleaning tasks. This makes it an excellent choice for green cleaning initiatives, as it minimizes environmental impact while maintaining high cleaning standards.

In summary, the Nilfisk-Advance America SR 1100S B combines efficiency, convenience, and advanced technology. Its compact design, powerful performance, and ease of use make it a valuable tool for anyone seeking to achieve optimal cleanliness in various institutional and commercial settings. Whether for daily maintenance or deep cleaning efforts, this scrubber dryer stands out as a reliable solution for modern cleaning challenges.
Top Page Image Contents