Nilfisk-Advance America SR 1100S B manual Starting and Stopping the Machine, Starting the machine

Page 64

ENGLISH

USER MANUAL

STARTING AND STOPPING THE MACHINE

Starting the machine

1.Sit on the driver's seat (25).

2.If necessary, adjust the seat to a comfortable position by using the lever (31).

If necessary, use the lever (87) to tilt the steering column (1) forward or backward in order to reach a comfortable position.

3.Turn the ignition key (72) to "I" and do not press the pedal (2). Check that the green warning light (75) (charged battery) turns on.

If the yellow (74) or red warning light (73) turns on, turn the ignition key to "0" and charge the batteries (see the procedure in the Maintenance chapter).

4.Disengage the parking brake by pressing and releasing the pedal (3).

5.Drive the machine to the working area, by keeping the hands on the steering wheel and pressing the pedal (2) on the front side to move forward and on the rear side to move backward.

The drive speed can be adjusted from zero to maximum speed by increasing the pressure on the pedal (2).

NOTE

The seat (25) is equipped with a safety sensor, which allows the machine to be driven by pressing the pedal (2) only when the operator is on the driver's seat.

6.Lower the main broom with the lever (86); it will start turning.

7.Turn on the vacuum system by pushing the switch (79) backward.

NOTE

The vacuum system turns on only when the main broom is lowered.

8.Lower the side brooms (10 and 11) with the lever (85).

NOTE

The side brooms (10 and 11) can be lowered and lifted even when the machine is moving.

The side brooms do not turn when they are lifted or when the main broom is lifted.

9.Start sweeping by turning the steering wheel (1) and moving the machine forward by pressing the pedal (2).

Stopping the machine

1.To stop the machine, release the pedal (2).

To stop the machine quickly, also press the service brake pedal (3).

In case of emergency, press the emergency push-button (82) to immediately stop the machine. To deactivate the emergency push-button (82), turn it in the direction shown by the arrow.

2.Lift the side brooms (10 and 11) with the lever (85).

3.Turn off the vacuum system by bringing back the switch (79) to the centre.

4.Lift the main broom (12) with the lever (86).

5.To stop the machine, turn the ignition key (72) to "0".

6.Engage the parking brake by pressing the pedal (3) and engaging the lever (4).

14

146 2494 000(2)2007-02 A

SR 1100S B

Page 63 Page 65
Image 64
Page 63 Page 65
Contents Sweeper SR 1100S B 146 2494 00022007-02 aSweeper SR 1100S BInhaltsverzeichnis EinleitungEinleitung AUSPACKEN/AUSLIEFERUNG Sicherheit Benutzte SymboleAllgemeine Hinweise Betriebsanleitung Deutsch Maschinenbeschreibung MaschinenaufbauMaschinenaufbau fortgesetzt 4341 4750Schalttafel UND Bedienelemente ZUBEHÖRE/OPTIONENTechnische Daten Allgemein WerteLeistungen Werte Batterien WerteSchaltplan FarbencodesSchaltplan fortgesetzt Betrieb PRÜFUNG/VORBEREITUNG DER Batterien AN Einer Neuen MaschineMaschineneinstellung VOR DEM Anlassen DER MaschineEinstellung des Ladegeräts Maschinenanlassen Maschinenanlassen UND -ABSTELLENMaschinenabstellen Maschine in Betrieb Entleerung DES AbfallbehältersNach DER Maschinenbenutzung SCHUB-/SCHLEPPBEWEGUNG DER MaschineWartung Übersichtstabelle DER Planmässigen WartungVorgang Bei Auslieferung AllePrüfung UND Einstellung DER Hauptkehrwalzenhöhe Ersetzen DER Hauptkehrwalze Die entsprechende Nabe a eingefügt wirdPrüfung UND Einstellung DER Seitenbesenhöhe Ersetzung DER SeitenbesenReinigung UND Vollständigkeitsprüfung Desb C E Staubfilters Prüfung der Seitenflaps Prüfung DER Flapshöhe UND FunktionsfähigkeitPrüfung der Vorder- und Hinterflaps Batterieladung durch externes Ladegerät BatterieladungBatterieladung durch externes Ladegerät Option PRÜFUNG/ERSETZUNG/RÜCKSCHALTUNG DER Sicherungen Prüfung/Ersetzung der FlachsicherungenPrüfung der rückschaltbaren Sicherungen EinbauVerschrottung FehlersucheFehler Mögliche Ursache Lösung Table DES Matieres IntroductionIntroduction Deballage / Livraison Securite Symboles UtilisesInstructions Generales Manuel Dutilisation Français Description DE LA Machine Structure DE LA MachineStructure DE LA Machine suite Tableau DE Bord ET Commandes Accessoires / OptionsCaracteristiques Techniques Caractéristiques générales ValeursPerformances Valeurs Batteries ValeursLégende Schema ElectriqueCodes des couleurs Schema Electrique suite Utilisation Controle / Preparation DES Batteries SUR UNE Machine NeuveConfiguration DU Type DE Batteries Installees WET OU GEL Avant LA Mise EN MarcheConfiguration de la machine Configuration du chargeur de batterieMise en marche de la machine Mise EN Marche ET Arret DE LA MachineArrêt de la machine Deplacement PAR Poussee / Remorquage DE LA Machine Machine AU TravailVidange DU Conteneur Dechets Apres Lutilisation DE LA MachineEntretien Plan Dentretien ProgrammeControle ET Reglage DE LA Hauteur DU Balai Central Remplacement DU Balai Central Remplacement DES Balais Lateraux Controle ET Reglage DE LA Hauteur DES Balais LaterauxNettoyage ET Controle DE Lintegrite DU Filtre a Poussiere Contrôle des volets latéraux Controle DE LA Hauteur ET DU Fonctionnement DES VoletsContrôle des volets avant et arrière Chargement DES Batteries Chargement des batteries avec chargeur de batterie externeControle / Remplacement Retablissement DES Fusibles Contrôle / remplacement des fusibles à lamelleContrôle des fusibles restaurables ReposeMise EN Decharge Depistage DES PannesProblème Cause probable Remède Table of Contents Manual Purpose and Contents HOW to Keep this Manual Declaration of ConformityTarget Identification DataSpare Parts and Maintenance UNPACKING/DELIVERYOther Reference Manuals Changes and ImprovementsSymbols SafetyGeneral Instructions English Machine Description Machine StructureMachine Structure Continues ACCESSORIES/OPTIONS Control PanelTechnical Data General ValuesPerformance Values Batteries ValuesKey Wiring DiagramColour code Wiring Diagram Continues Battery CHECK/SETTING on a NEW Machine USEWET or GEL Battery Setting Machine settingBattery charger setting Before Starting the MachineStarting the machine Starting and Stopping the MachineStopping the machine Machine Operation Hopper EmptyingAfter Machine USE PUSHING/TOWING the MachineMaintenance Scheduled Maintenance TableProcedure Upon delivery 200 400Main Broom Height Check Adjustment Main Broom Replacement Side Broom Height Check Adjustment Side Broom ReplacementDust Filter Cleaning and Integrity Check Side skirt check Skirt Height and Operation CheckFront and rear skirt check Charging the batteries with an external battery charger Battery ChargingCharging the batteries with the battery charger optional Fuse CHECK/REPLACEMENT/RESET Lamellar fuse check/replacementAssembly Circuit breaker checkScrapping TroubleshootingTrouble Possible cause Remedy Inhoudsopgave InleidingInleiding Verpakking VERWIJDEREN/AFLEVERING Veiligheid Gebruikte SymbolenAlgemene Instructies Gebruiksaanwijzing Nederlands Beschrijving VAN DE Machine Bouw VAN DE MachineOpbouw VAN DE Machine vervolg Accessoires / Opties Bedieningspaneel EN KnoppenTechnische Eigenschappen Algemeen WaardenPrestaties Waarden Accus WaardenElektrisch Schema KleurcoderingElektrische Installatie vervolg Gebruik Controle / Voorbereidingen Voor Accus OP EEN Nieuwe MachineInstelling VAN HET Type Gemonteerde Accu WET of GEL Voor HET Starten VAN DE MachineAfstelling van de machine De acculader instellenStarten van de machine DE Machine Starten EN StoppenDe machine stoppen Machine in Bedrijf DE Afvalcontainer LegenNA Gebruik VAN DE Machine DUW-/TREKBEWEGING VAN DE MachineProcedure Bij aflevering OnderhoudsschemaOnderhoud DE Hoogte VAN DE Hoofdborstel Controleren EN Afstellen DE Hoofdborstelvervangen DE Hoogte VAN DE Zijborstels Controleren EN Afstellen DE Zijborstels VervangenReiniging EN Contole OP Integriteit VAN HET Stoffilter Controle van de zijflaps Controle VAN DE Hoogte EN Werking VAN DE FlapsControle van de voor- en achterflap Accu’s met externe acculader opladen ACCU’S OpladenAccu’s met externe acculader opladen optioneel Controle / Vervanging / Resetten VAN DE Zekeringen Controle/vervanging van de smeltzekeringenControle van de herbruikbare zekeringen MontageVerwijdering Storingen LokaliserenProbleem Waarschijnlijke oorzaak Oplossing

SR 1100S B specifications

The Nilfisk-Advance America SR 1100S B is a versatile and efficient scrubber dryer that enhances cleaning operations in a variety of settings. Known for its robust design and user-friendly features, this machine is ideal for both small and large facilities, including warehouses, retail spaces, and industrial environments.

One of the main features of the SR 1100S B is its compact and ergonomic design, which allows for easy maneuverability in tight spaces. This enables cleaning staff to efficiently scrub floors without the hassle of navigating bulky equipment. With a cleaning width of 28 inches, it provides effective coverage while ensuring ease of use.

Powered by a durable battery system, the SR 1100S B allows for cord-free operation, adding to its convenience. The model is equipped with an auto-fill feature that simplifies the refilling of the solution tank, saving time in busy environments where every minute counts. The large solution and recovery tanks minimize downtime by reducing the frequency of refills and disposals during cleaning tasks.

The scrubber dryer utilizes advanced motor technology, offering powerful suction and scrubbing capabilities. Its high-performance brushes deliver superior results, effectively removing dirt and grime from different types of flooring, including tile, vinyl, and concrete. The machine also features adjustable down pressure settings, allowing operators to customize performance based on the specific cleaning needs of the surface being treated.

An intuitive control panel enhances user experience, featuring easy-to-read indicators for battery status and operational settings. The SR 1100S B is designed with safety in mind, incorporating user-friendly controls and configurations that reduce the risk of accidents during operation.

Another notable characteristic is the unit's ability to operate with eco-friendly cleaning solutions, promoting a more sustainable approach in daily cleaning tasks. This makes it an excellent choice for green cleaning initiatives, as it minimizes environmental impact while maintaining high cleaning standards.

In summary, the Nilfisk-Advance America SR 1100S B combines efficiency, convenience, and advanced technology. Its compact design, powerful performance, and ease of use make it a valuable tool for anyone seeking to achieve optimal cleanliness in various institutional and commercial settings. Whether for daily maintenance or deep cleaning efforts, this scrubber dryer stands out as a reliable solution for modern cleaning challenges.
Top Page Image Contents