Nilfisk-Advance America SR 1100S B manual Use, Battery CHECK/SETTING on a NEW Machine

Page 62

ENGLISH

USER MANUAL

USE

WARNING!

On some points of the machine there are some adhesive plates indicating:

–DANGER

–WARNING

–CAUTION

–CONSULTATION

While reading this Manual, the operator must pay careful attention to the symbols shown on the plates. Do not cover these plates for any reason and immediately replace them if they are damaged.

BATTERY CHECK/SETTING ON A NEW MACHINE

NOTE

If the machine is equipped with electronic battery charger (optional), this must be connected to the batteries to allow the machine to operate.

The machine needs four 6 V batteries, connected according to the diagram (44), or one 24 V battery box. The machine can be supplied in one of the following confi gurations:

a)WET or GEL batteries already installed on the machine

b)WET batteries installed on the machine but without electrolyte

c)Without batteries

According to machine confi guration, proceed as follows.

a)WET or GEL batteries already installed on the machine

1.Open the machine hood (7) and check that the batteries are connected to the machine with the connector (46).

2.Close the hood (7).

3.Insert the ignition key (72) and turn it to "I" [without pressing the pedal (2)]. If the green warning light (75) turns on, the batteries are ready to be used.

If the yellow (74) or red (73) warning light turns on, the batteries must be charged (see the procedure in Maintenance chapter).

b)WET batteries installed on the machine but without electrolyte

1.Open the machine hood (7).

2.Remove all battery caps (45).

WARNING!

Pay attention when using sulphuric acid, as it is corrosive. If it comes in contact with skin or eyes, rinse thoroughly with water and consult a physician.

Batteries have to be filled in a well-ventilated area. Wear protective gloves.

3.Fill the battery cells with sulphuric acid for batteries (density from 1.27 to 1.29 kg at 25 °C) in accordance with the instructions shown in the Battery Manual.

The correct quantity of sulphuric acid is shown in the Battery Manual.

4.Let the batteries rest and fi ll in with sulphuric acid in accordance with the instructions shown in the Battery Manual.

5.Charge the batteries (see the procedure in Maintenance chapter).

c)Without batteries

1.Buy appropriate batteries (see the Technical Data paragraph and the diagram (44)). For the battery choice and installation, apply to qualifi ed battery Retailers.

2.Install the batteries.

3.Set the machine and the battery charger (if equipped) according to the type of batteries installed, as shown in the next paragraph.

12

146 2494 000(2)2007-02 A

SR 1100S B

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Sweeper SR 1100S B 146 2494 00022007-02 aSweeper SR 1100S BInhaltsverzeichnis EinleitungEinleitung AUSPACKEN/AUSLIEFERUNG Allgemeine Hinweise Benutzte SymboleSicherheit Betriebsanleitung Deutsch Maschinenbeschreibung MaschinenaufbauMaschinenaufbau fortgesetzt 4341 4750Schalttafel UND Bedienelemente ZUBEHÖRE/OPTIONENLeistungen Werte Technische DatenAllgemein Werte Batterien WerteSchaltplan FarbencodesSchaltplan fortgesetzt Betrieb PRÜFUNG/VORBEREITUNG DER Batterien AN Einer Neuen MaschineEinstellung des Ladegeräts VOR DEM Anlassen DER MaschineMaschineneinstellung Maschinenabstellen Maschinenanlassen UND -ABSTELLENMaschinenanlassen Nach DER Maschinenbenutzung Maschine in BetriebEntleerung DES Abfallbehälters SCHUB-/SCHLEPPBEWEGUNG DER MaschineVorgang Bei Auslieferung WartungÜbersichtstabelle DER Planmässigen Wartung AllePrüfung UND Einstellung DER Hauptkehrwalzenhöhe Ersetzen DER Hauptkehrwalze Die entsprechende Nabe a eingefügt wirdPrüfung UND Einstellung DER Seitenbesenhöhe Ersetzung DER SeitenbesenReinigung UND Vollständigkeitsprüfung Desb C E Staubfilters Prüfung der Vorder- und Hinterflaps Prüfung DER Flapshöhe UND FunktionsfähigkeitPrüfung der Seitenflaps Batterieladung durch externes Ladegerät Option BatterieladungBatterieladung durch externes Ladegerät Prüfung der rückschaltbaren Sicherungen PRÜFUNG/ERSETZUNG/RÜCKSCHALTUNG DER SicherungenPrüfung/Ersetzung der Flachsicherungen EinbauFehler Mögliche Ursache Lösung FehlersucheVerschrottung Table DES Matieres IntroductionIntroduction Deballage / Livraison Instructions Generales Symboles UtilisesSecurite Manuel Dutilisation Français Description DE LA Machine Structure DE LA MachineStructure DE LA Machine suite Tableau DE Bord ET Commandes Accessoires / OptionsPerformances Valeurs Caracteristiques TechniquesCaractéristiques générales Valeurs Batteries ValeursCodes des couleurs Schema ElectriqueLégende Schema Electrique suite Utilisation Controle / Preparation DES Batteries SUR UNE Machine NeuveConfiguration de la machine Configuration DU Type DE Batteries Installees WET OU GELAvant LA Mise EN Marche Configuration du chargeur de batterieArrêt de la machine Mise EN Marche ET Arret DE LA MachineMise en marche de la machine Vidange DU Conteneur Dechets Deplacement PAR Poussee / Remorquage DE LA MachineMachine AU Travail Apres Lutilisation DE LA MachineEntretien Plan Dentretien ProgrammeControle ET Reglage DE LA Hauteur DU Balai Central Remplacement DU Balai Central Remplacement DES Balais Lateraux Controle ET Reglage DE LA Hauteur DES Balais LaterauxNettoyage ET Controle DE Lintegrite DU Filtre a Poussiere Contrôle des volets avant et arrière Controle DE LA Hauteur ET DU Fonctionnement DES VoletsContrôle des volets latéraux Chargement DES Batteries Chargement des batteries avec chargeur de batterie externeContrôle des fusibles restaurables Controle / Remplacement Retablissement DES FusiblesContrôle / remplacement des fusibles à lamelle ReposeProblème Cause probable Remède Depistage DES PannesMise EN Decharge Table of Contents Target Manual Purpose and ContentsHOW to Keep this Manual Declaration of Conformity Identification DataOther Reference Manuals Spare Parts and MaintenanceUNPACKING/DELIVERY Changes and ImprovementsGeneral Instructions SafetySymbols English Machine Description Machine StructureMachine Structure Continues ACCESSORIES/OPTIONS Control PanelPerformance Values Technical DataGeneral Values Batteries ValuesColour code Wiring DiagramKey Wiring Diagram Continues Battery CHECK/SETTING on a NEW Machine USEBattery charger setting WET or GEL Battery SettingMachine setting Before Starting the MachineStopping the machine Starting and Stopping the MachineStarting the machine After Machine USE Machine OperationHopper Emptying PUSHING/TOWING the MachineProcedure Upon delivery MaintenanceScheduled Maintenance Table 200 400Main Broom Height Check Adjustment Main Broom Replacement Side Broom Height Check Adjustment Side Broom ReplacementDust Filter Cleaning and Integrity Check Front and rear skirt check Skirt Height and Operation CheckSide skirt check Charging the batteries with the battery charger optional Battery ChargingCharging the batteries with an external battery charger Assembly Fuse CHECK/REPLACEMENT/RESETLamellar fuse check/replacement Circuit breaker checkTrouble Possible cause Remedy TroubleshootingScrapping Inhoudsopgave InleidingInleiding Verpakking VERWIJDEREN/AFLEVERING Algemene Instructies Gebruikte SymbolenVeiligheid Gebruiksaanwijzing Nederlands Beschrijving VAN DE Machine Bouw VAN DE MachineOpbouw VAN DE Machine vervolg Accessoires / Opties Bedieningspaneel EN KnoppenPrestaties Waarden Technische EigenschappenAlgemeen Waarden Accus WaardenElektrisch Schema KleurcoderingElektrische Installatie vervolg Gebruik Controle / Voorbereidingen Voor Accus OP EEN Nieuwe MachineAfstelling van de machine Instelling VAN HET Type Gemonteerde Accu WET of GELVoor HET Starten VAN DE Machine De acculader instellenDe machine stoppen DE Machine Starten EN StoppenStarten van de machine NA Gebruik VAN DE Machine Machine in BedrijfDE Afvalcontainer Legen DUW-/TREKBEWEGING VAN DE MachineOnderhoud OnderhoudsschemaProcedure Bij aflevering DE Hoogte VAN DE Hoofdborstel Controleren EN Afstellen DE Hoofdborstelvervangen DE Hoogte VAN DE Zijborstels Controleren EN Afstellen DE Zijborstels VervangenReiniging EN Contole OP Integriteit VAN HET Stoffilter Controle van de voor- en achterflap Controle VAN DE Hoogte EN Werking VAN DE FlapsControle van de zijflaps Accu’s met externe acculader opladen optioneel ACCU’S OpladenAccu’s met externe acculader opladen Controle van de herbruikbare zekeringen Controle / Vervanging / Resetten VAN DE ZekeringenControle/vervanging van de smeltzekeringen MontageProbleem Waarschijnlijke oorzaak Oplossing Storingen LokaliserenVerwijdering

SR 1100S B specifications

The Nilfisk-Advance America SR 1100S B is a versatile and efficient scrubber dryer that enhances cleaning operations in a variety of settings. Known for its robust design and user-friendly features, this machine is ideal for both small and large facilities, including warehouses, retail spaces, and industrial environments.

One of the main features of the SR 1100S B is its compact and ergonomic design, which allows for easy maneuverability in tight spaces. This enables cleaning staff to efficiently scrub floors without the hassle of navigating bulky equipment. With a cleaning width of 28 inches, it provides effective coverage while ensuring ease of use.

Powered by a durable battery system, the SR 1100S B allows for cord-free operation, adding to its convenience. The model is equipped with an auto-fill feature that simplifies the refilling of the solution tank, saving time in busy environments where every minute counts. The large solution and recovery tanks minimize downtime by reducing the frequency of refills and disposals during cleaning tasks.

The scrubber dryer utilizes advanced motor technology, offering powerful suction and scrubbing capabilities. Its high-performance brushes deliver superior results, effectively removing dirt and grime from different types of flooring, including tile, vinyl, and concrete. The machine also features adjustable down pressure settings, allowing operators to customize performance based on the specific cleaning needs of the surface being treated.

An intuitive control panel enhances user experience, featuring easy-to-read indicators for battery status and operational settings. The SR 1100S B is designed with safety in mind, incorporating user-friendly controls and configurations that reduce the risk of accidents during operation.

Another notable characteristic is the unit's ability to operate with eco-friendly cleaning solutions, promoting a more sustainable approach in daily cleaning tasks. This makes it an excellent choice for green cleaning initiatives, as it minimizes environmental impact while maintaining high cleaning standards.

In summary, the Nilfisk-Advance America SR 1100S B combines efficiency, convenience, and advanced technology. Its compact design, powerful performance, and ease of use make it a valuable tool for anyone seeking to achieve optimal cleanliness in various institutional and commercial settings. Whether for daily maintenance or deep cleaning efforts, this scrubber dryer stands out as a reliable solution for modern cleaning challenges.
Top Page Image Contents