Servis-Rhino P/N 00763618C manual Hydraulic Cylinder Attachment, Wing Mower Attachment

Page 78

ASSEMBLY

ASSEMBLY

HYDRAULIC CYLINDER ATTACHMENT

Attach the Rear Hydraulic Cylinder to the Main Frame with Fittings pointing down. Retain with Pin and Cotter Pin. Figure 5. Attach the Wing Hydraulic Cylinders to the the Main Frame and Toggel Links with Pins provided. Figure 6.

FIGURE 5

FIGURE 6

WING MOWER ATTACHMENT

NOTE: The Wing Mowers are right and left mowers. On all Models there is not an inside Rear Caster Wheel, Instead there is a Cutting Height Shaft support that rest on the Mainframe Flat Plate.

Position the Wing Mowers under the Wing Lift Arms and remove the Attachment Pin (1) from the Swivel. Attach the Wing Mower to the Lift Arm and secure with 1/2" x 1-1/2" Bolt, (2) flatwasher, and locknut. Figure 7.

1

2

	FIGURE 7
Turf Flex 08/01	Assembly Section 3-4	R 12-13-95
	Assembly Section 3-4	R 12-13-95

© 2004 Alamo Group Inc.

Image 78

Contents Turf Flex To the OWNER/OPERATOR/DEALER Safety Training Makes the Difference Page Table of Contents Page Safety Section Peligro ¡LEA ELInstructivo Safety Safety Following rules Serious injury or death. SG-26 Safety With the windows closed. SGM-11 Stop Mowing if Passersby are Within 100 Yards Unless Wait a minute...Save a life Parts Information See Your SERVIS-RHINO Dealer12 3A 3536 QTY Level Description PeligroSafety D103 Turf Flex 08/01 Safety Section 04-23-99 00763535 Turf Flex Name D102 Safety Federal Laws and Regulations Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Assembly Dealer SET-UP InstructionsSwivel and Lift ARM Attachment Hydraulic Cylinder Attachment Wing Mower AttachmentCaster Wheel Attachments Rear Mower Figure Caster Wheel Attachments Wing Mower Figure Caster Wheel Attachments Rear Mower 11 ModelCaster Wheel Attachments Wing Mower 11 Model Figure Rear Mower AttachmentAxle Arms in Postion Assembly Spool Valve Driveshaft AttachmentHydraulic Hose Attachment SMV AttachmentWing Driveshaft Attachment Left Wing Driveline Right Wing DrivelineRope Routing for Automatic Head Locks Assembly Page Operation Section Tractor Preparation Attaching Cutter to TractorSafety Chains Pull Type Cutting Height Adjustment Roller AdjustmentDriveline Attachment to Tractor Starting & Stopping Mower Cutting SpeedMowing Tips Driveline Length Check Procedure Before Operating or Transporting this MowerSpecial Instructions for Rough Terrain Operations Transporting Cutter CV Driveline Check Procedures DEGProblem Possible Cause Remedy StreakingFrayed Edges on Page Maintenance Section Maintenance Lubrication InformationGearbox Center 4-WAY Gear BOXSwivel Assembly Gauge Wheel AssembliesBlade Spindle Lubrication Driveline Lubrication CV Driveline Profile LubricationWing Driveline Profile Lubrication Blade Sharpening Blade InstallationBlade Servicing Blade RemovalBelt Adjustment Procedure All Models except Belt Adjustment Procedure 11 Model Belt Installation 11 ModelStorage Proper Torque for FastenersMaintenance Tool Turf Flex Maintenance Section 12-13-95 Page To the OWNER/OPERATOR/DEALER TURFFLEX-OMWPL-08/01