Multiquip operation manual DCA-70SSJU Series Output Terminal Panel Familiarization

DCA-70SSJU SERIES — OUTPUT TERMINAL PANEL FAMILIARIZATION

Output Terminal Familiarization

The “Output Terminal Panel ” (Figure 8) is provided with the following:

Three (3) 240V output receptacles, 50 amp

Three (3) Circuit Breakers 240V @50 amps

Two (2) 120V GFCI receptacles, 20 amp

Two (2) GFCI Circuit Breakers 120V@ 20 amps

One Main Circuit Breaker 250V @175 amps

Five (5) Output Terminal Lugs

Output Terminal Panel

The OutputTerminal Panel (Figure 8) shown below is located on the right-hand side (left from control panel) of the generator. Lift up on the cover to gain access to receptacles and terminal lugs.

NOTE	Terminal legs “O” and “Ground”
	are considered bonded grounds.

Figure 8. Output Terminal Panel

PAGE 28 — DCA-70SSJU SERIES — OPERATION AND PARTS MANUAL (STD) — REV. #5 (06/03/03)