Black & Decker LLP120B manual Removing the saw chain & chain bar figs. F, G, Operation

Page 11

Removing the saw chain & chain bar (figs. F, G)

WARNING: Before chain or other adjustments, make sure

that the battery is disconnected from the tool.

 

 

WARNING: Laceration

F

1 3

14

hazard. Always wear protective

gloves when installing or

 

 

 

removing the saw chain. The saw

 

 

 

chain is sharp and can cut you

 

 

 

when it is not running.

 

 

 

WARNING: Burn hazard.

 

 

 

the top jaw (1).

- Insert the chain bar into the space between the chain tensioner and align with the chain bar locator, angle the chain bar down ensuring it is correctly located.

- Place the chain (14) around the front of the chain bar and engage in the nose sprocket of the chain bar. Make sure chain is installed properly, with the cutting teeth facing forward as shown here.

The chain guide bar and chain

may become hot during use.

Allow to cool before adjustment or

removal.

-

Place the tool on a firm surface.

-

Rotate the two retention bolts (11) counter clockwise with wrench

(12) provided and remove completely.

-

Remove the chain access cover (13).

-

Open the handles and pull back the top chain cover jaw (1).

-

Pull back chain bar (3) and then lift the saw chain (14) out of the

groove in the guide bar. The chain (14) can then be removed from

the unit.

-

The chain bar can then be angled up.

Assembling the chain bar and chain (figs. G, H)

 

WARNING: Before chain or other adjustments, make sure

-Pull the chain bar and chain back, engaging it in the groove in the chain bar and then over the sprocket (15) positioning teeth in the correct position on the sprocket.

-Replace the chain access cover (13) and retention bolts (11) tightening securely.

H

 

 

 

15

14

15

14

that the battery is disconnected from the tool.

WARNING: Always wear

G

protective gloves when installing or

removing the saw chain. The saw

3

chain is sharp and can cut you

1

when it is not running.

- Ensure the operation is carried

 

out on a firm surface.

 

- Open the handles and pull back

 

Operation

Never operate a chain saw that is damaged or improperly adjusted or that is not completely and securely assembled. Be sure that the saw chain stops moving when the power control system triggers are released. Never adjust the guide bar or saw chain when the engine is operating.

WARNING: Let the tool work at its own pace. Do not overload. - Carry out regular cleaning of the unit as described in the maintenance section and in particular cleaning inside the chain access cover.

- The lower guard jaw (2) and top jaw (1) are designed to close

11when one of the handles is released or when the piece of branch

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 20v max* lithium alligator lopper Intended use Important Safety InstructionsSafety Instructions and Warnings for Chain Saws Check Damaged Parts Guard Against Kickback Disconnect BatteryMaintain Chain Saw With Care Stay AlertPower Supply Additional safety instructions for AlligatorTM LopperKickback Safety Features Dust, which may cause serious and permanent respiratory or SymbolsElectrical safety Chain SAW Names and Terms Important safety instructions for Battery chargersAmpere Rating ComponentsStorage Recommendations Important safety warnings For battery packsImportant Charging Notes Charging ProcedureLeaving the battery in the charger Replacing the chain and chain bar Chain tension adjustmentPreparing AlLigator Lopper For Use Operation That the battery is disconnected from the toolRemoving the saw chain & chain bar figs. F, G Assembling the chain bar and chain figs. G, HRemove branches as shown in Fig L Switching on fig. KOiling fig Trimming branchesMaintenance Rbrc Seal AccessoriesService Information Replacement chain catalog number RC600To shutoff abruptly when the charge is depleted TroubleshootingProblem Possible Cause Two -year LImited warranty Manuel D’ Instructions Scies à chaîne Utilisation prÉvueDirectives DE Première Importance Débrancher le bloc-piles Porter des lunettes de sécuritéTransport de la scie à chaîne Entretien soigné de la scie à chaîneBloc d’alimentation Sécurité en matière d’électricité Directives de sÉcuritÉ concernant l’effet de rebondTerminologie ET Nomenclature Relatives À ’ÉBRANCHEUR SymbolesCes chargeurs n’ont pas été conçus pour être utilisés à Que ceux qui sont mentionnés dans le présent mode d’emploiLe chargeur fourni avec ce produit est correctement branché ’il est orienté en position verticale ou au plancherIntensité a ComposantesLire toutes les directives Conserver ces mesuresDirectives de sÉcuritÉ importantes pour Les blocs-piles Remarques importantes pour le chargement Recommandations en matière de rangementProcédure de charge Chargeur Figure BRéglage de la tension de la chaîne Insertion et retrait du bloc-piles de l’outilFig. G & H Remplacement de la chaîne et du guide-chaîne Mise en marche et arrêt fig. J Lubrification figFonctionnemenT EnTretienLubrification Mise en marche fig. KTaillage des branches NettoyageRangement Black+Decker AccessoiresLe sceau Srprcmc Information sur les réparations Garantie limitéE de deux ans Maximiser la durée de vie du Problème Cause possible Solution possibleDEpannage Page Podadora Alligator CON Batería DE Litio DE 20 V MÁX Normas generales de seguridad Uso previstoDesconecte la batería Use lentes de seguridadTransporte de la sierra Conserve la sierra de cadena adecuadamenteFuente de energía CaracterÍsticas de seguridad durante el Retroceso Símbolos Nombres Y Términos DE LAS Sierras DE CadenaNo exponga el cargador a la lluvia ni a la nieve Amperaje ComponentesNunca intente conectar 2 cargadores juntos Lea todas las instruccionesNotas importantes sobre la carga Procedimiento de cargaVerificación y ajuste de la tensión de la cadena Figura D Ajuste de tensión de la cadenaRetiro de la cadena y de la barra de la sierra Figuras F y G Lubricación Figura OperaciÓnLimpieza Encendido KRecorte de ramas MantenimientoAlmacenamiento LubricaciónTransporte Afilado de la cadena de la sierraEl sello Rbrc AccesoriosInformación de mantenimiento Garantía limitado de dos años Maximizar la vida útil del Problema Causa posible Solución posibleEnrique Robles Perfiles y Herramientas de MoreliaGpo. Comercial de Htas. y Refacciones Ferre Pat de Puebla, S.A. de C.V De Occidente, S.A. de C.V

LLP120B specifications

The Black & Decker LLP120B is a versatile and powerful cordless lithium-ion electric wine opener that has gained popularity among wine enthusiasts for its sleek design and remarkable performance. This innovative tool streamlines the wine-opening process, making it an essential accessory for any home bar or kitchen.

One of the standout features of the LLP120B is its cordless convenience. This electric wine opener allows users to uncork wine bottles effortlessly without the hassle of tangled cords. Powered by a lithium-ion battery, it offers the freedom to open bottles anywhere, whether at home, during a picnic, or at a gathering with friends.

In terms of design, the Black & Decker LLP120B boasts an ergonomic grip that enhances ease of use. Its lightweight and comfortable build allows for a secure hold, making it accessible for users of all ages. With its modern aesthetic and sleek lines, it also adds a touch of elegance to any tabletop setting.

The efficiency of the LLP120B is another key characteristic. It can open up to 30 bottles on a single charge, making it ideal for entertaining guests without the worry of running out of battery power. The quick and reliable operation ensures that users can enjoy their wine without unnecessary delays.

The device is equipped with a durable stainless steel and plastic construction that guarantees longevity. Its spiral and corkscrew mechanism is designed to fit all standard cork sizes, providing versatility for various wine bottles. Additionally, the LLP120B features a built-in foil cutter, allowing users to remove foil caps with ease before uncorking their bottles.

Charging the Black & Decker LLP120B is a breeze, thanks to its convenient charging base that allows the opener to be stored tidily when not in use. This aspect not only maintains the device but ensures that it is always ready for action when needed.

In conclusion, the Black & Decker LLP120B is an exceptional electric wine opener that combines convenience, efficiency, and style. Its cordless design, ergonomic grip, sturdy construction, and ability to handle multiple bottles on a single charge position it as a must-have for wine lovers. Whether hosting a casual gathering or enjoying a quiet evening, this electric wine opener makes the experience smoother and more enjoyable.
Top Page Image Contents